ANG-11HAW1

Angle Position Sensors ANG Sensors Thin, programmable, non-contact magnetic position sensors capable of continuous rotation, with dual outputs available. Description The ANG Series sensors are non-contact, intrinsically linear position sensors with one or two independent (redundant) outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft. Actuator magnet part number AS500106 is required to assure proper operation (ordered separately). Features  Angular position sensor with high tolerance for misalignment  Non-contact angular position sensing and full 360O rotation  Custom programming available for: angle range, slope, PWM output – contact factory  No mechanical interface means no parts to wear out or jam  Comes with 20 AWG 305 mm (12”) discrete wire leads  RoHS Compliant  IP68*  Maximum air gap of 6 mm (0.24”)  Compliant to industrial/automotive EMC/EMI/ESD directives Typical Applications  Hydraulic valves  Hydraulic controls  Electric drives  Pneumatic controls  Zero-contact encoder alternative  Gear selection / shifting position  Lifting / ride height position  Throttle / pedal position  Steering wheel position Environmental Specifications Operating Temperature -40 ⁰C to 140 ⁰C (-40 ⁰F to 284 ⁰F) Ingress Protection IP68* **Contact ZF for detail...