Document
Angle Position Sensors
ANG Sensors
Thin, programmable, non-contact magnetic position sensors capable of continuous rotation, with dual outputs available.
Description
The ANG Series sensors are non-contact, intrinsically linear position sensors with one or two independent (redundant) outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft.
Actuator magnet part number AS500106 is required to assure proper operation (ordered separately).
Features
Angular position sensor with high tolerance for misalignment Non-contact angular position sensing and full 360O rotation Custom programming available for: angle range, slope, PWM
output – contact factory No mechanical interface means no parts to wear out or jam Comes with 20 AWG 305 mm (12”) discrete wire leads RoHS Compliant IP68* Maximum air gap of 6 mm (0.24”) Compliant to industrial/automotive EMC/EMI/ESD directives
Typical Applications
Hydraulic valves Hydraulic controls Electric drives Pneumatic controls Zero-contact encoder alternative Gear selection / shifting position Lifting / ride height position Throttle / pedal position Steering wheel position
Environmental Specifications
Operating Temperature
-40 ⁰C to 140 ⁰C (-40 ⁰F to 284 ⁰F)
Ingress Protection
IP68*
**Contact ZF for details on testing conditions
Electrical Specifications
Input Supply Voltage 5.0 VDC ± 10%
Output Signal Input Current
Resolution Accuracy, overall
Output Linearity
Maximum Overvoltage
Reverse Battery Protection
16 VDC 0.5 – 4.5 VDC (with 5 VDC input)
12 VDC
Single output
8 mA typ., 10 mA max.
Dual output
16 mA typ., 20 mA max.
12 bit
Programmed angle sensing range 35⁰ < 65⁰ : ± 2.5% Full scale
Programmed angle sensing range: 65⁰ < 360⁰ : ± 2.0% Full scale
Programmed angle sensing range 35⁰ < 65⁰ : ± 2.5% Full scale
Programmed angle sensing range: 65⁰ < 360⁰ : ± 1.0% Full scale
Mechanical Specifications
Measuring Range Air Gap Eccentricity
0⁰ to 360⁰, customizable (see graph)
1 mm to 6 mm (application dependent); 2.5 mm typ. ± 2 mm (0.08”)
www.cherryswitches.com
Page 1 of 2
Last update 2016-07-12; specifications subject to change without notice.
Products
Part Number ANG-11HAW1 ANG-21HAW1
Output Analog single Analog dual
Interface 20 AWG x 305 mm (12") discrete wires 20 AWG x 305 mm (12") discrete wires
Typical Output vs. Angular Rotation (as percentage of input)
Dimensions mm (inches)
www.cherryswitches.com
Page 2 of 2
Last update 2016-07-12; specifications subject to change without notice.
.