TMS320C32 Datasheet: DIGITAL SIGNAL PROCESSORS





TMS320C32 DIGITAL SIGNAL PROCESSORS Datasheet

Part Number TMS320C32
Description DIGITAL SIGNAL PROCESSORS
Manufacture etcTI
Total Page 30 Pages
PDF Download Download TMS320C32 Datasheet PDF

Features: TMS320C32 DIGITAL SIGNAL PROCESSOR D Hi gh-Performance Floating-Point DSP – T MS320C32-60 (5 V) 33-ns Instruction Cyc le Time 330 Million Operations Per Seco nd (MOPS), 60 Million Floating-Point Op erations Per Second (MFLOPS), 30 Millio n Instructions Per Second (MIPS) – TM S320C32-50 (5 V) 40-ns Instruction Cycl e Time 275 MOPS, 50 MFLOPS, 25 MIPS – TMS320C32-40 (5 V) 50-ns Instruction C ycle Time 220 MOPS, 40 MFLOPS, 20 MIPS D 32-Bit High-Performance CPU D 16- / 3 2-Bit Integer and 32- / 40-Bit Floating -Point Operations D 32-Bit Instruction Word, 24-Bit Addresses D Two 256 × 32- Bit Single-Cycle, Dual-Access On-Chip R AM Blocks D Flexible Boot-Program Loade r D On-Chip Memory-Mapped Peripherals: – One Serial Port – Two 32-Bit Time rs – Two-Channel Direct Memory Access (DMA) Coprocessor With Configurable Pr iorities D Enhanced External Memory Int erface That Supports 8- / 16- / 32-Bit- Wide External RAM for Data Access and P rogram Execution From 16- / 32-Bit-Wide External RAM D TMS320C30 and TMS320C.

Keywords: TMS320C32, datasheet, pdf, etcTI, DIGITAL, SIGNAL, PROCESSORS, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

TMS320C32
DIGITAL SIGNAL PROCESSOR
D High-Performance Floating-Point DSP
– TMS320C32-60 (5 V)
33-ns Instruction Cycle Time
330 Million Operations Per Second
(MOPS), 60 Million Floating-Point
Operations Per Second (MFLOPS), 30
Million Instructions Per Second (MIPS)
– TMS320C32-50 (5 V)
40-ns Instruction Cycle Time
275 MOPS, 50 MFLOPS, 25 MIPS
– TMS320C32-40 (5 V)
50-ns Instruction Cycle Time
220 MOPS, 40 MFLOPS, 20 MIPS
D 32-Bit High-Performance CPU
D 16- / 32-Bit Integer and 32- / 40-Bit
Floating-Point Operations
D 32-Bit Instruction Word, 24-Bit Addresses
D Two 256 × 32-Bit Single-Cycle, Dual-Access
On-Chip RAM Blocks
D Flexible Boot-Program Loader
D On-Chip Memory-Mapped Peripherals:
– One Serial Port
– Two 32-Bit Timers
– Two-Channel Direct Memory Access
(DMA) Coprocessor With Configurable
Priorities
D Enhanced External Memory Interface That
Supports 8- / 16- / 32-Bit-Wide External RAM
for Data Access and Program Execution
From 16- / 32-Bit-Wide External RAM
D TMS320C30 and TMS320C31 Object Code
Compatible
D Fabricated using 0.7 µm Enhanced
Performance Implanted CMOS (EPIC)
Technology by Texas Instruments (TI)
SPRS027C – JANUARY 1995 – REVISED DECEMBER 1996
D 144-Pin Plastic Quad Flat Package
( PCM Suffix ) 5 V
D Eight Extended-Precision Registers
D Two Address Generators With Eight
Auxiliary Registers and Two Auxiliary
Register Arithmetic Units (ARAUs)
D Two Low-Power Modes
D Two- and Three-Operand Instructions
D Parallel Arithmetic Logic Unit (ALU) and
Multiplier Execution in a Single Cycle
D Block-Repeat Capability
D Zero-Overhead Loops With Single-Cycle
Branches
D Conditional Calls and Returns
D Interlocked Instructions for
Multiprocessing Support
D One External Pin, PRGW, That Configures
the External-Program-Memory Width to
16 or 32 Bits
D Two Sets of Memory Strobes (STRB0 and
STRB1) and One I / O Strobe (IOSTRB)
Allow Zero-Glue Logic Interface to Two
Banks of Memory and One Bank of External
Peripherals
D Separate Bus-Control Registers for Each
Strobe-Control Wait-State Generation,
External Memory Width, and Data Type Size
D STRB0 and STRB1 Memory Strobes Handle
8-, 16-, or 32-Bit External Data Accesses
(Reads and Writes)
D Multiprocessor Support Through the HOLD
and HOLDA Signals Is Valid for All Strobes
description
The TMS320C32 is the newest member of the TMS320C3x generation of digital signal processors ( DSPs) from
Texas Instruments. The TMS320C32 is an enhanced 32-bit floating-point processor manufactured in 0.7-µm
triple-level-metal CMOS technology. The enhancements to the TMS320C3x architecture include a
variable-width external-memory interface, faster instruction cycle time, power-down modes, two-channel DMA
coprocessor with configurable priorities, flexible boot loader, relocatable interrupt-vector table, and edge- or
level-triggered interrupts.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC and TI are trademarks of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1996, Texas Instruments Incorporated
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443
1

                    
                    






Index : 0  1  2  3   4  5  6  7   8  9  A  B   C  D  E  F   G  H  I  J   K  L  M  N   O  P  Q  R   S  T  U  V   W  X  Y  Z
@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)