RTS3LA12

General Purpose RT-iPower SCHRACK Power PCB Relay RT Inrush Power n 1 pole 16A, 1 form A (NO) contact (AgSnO2 or W pre-make contact + AgSnO2) n Mono- or bistable coil n 5kV/10mm coil-contact n Reinforced insulation n Test tab (manual operator) optional for RTT3T bistable versions n WG version: product in accordance to IEC60335-1 n RTS3T: Electronic ballast UL508/NEMA 410 rated n RTSET: 8A Electronic ballast rated Typical applications LED lighting systems, filament and incandescent lamp loads, movement detectors, light sensors, intelligent wall sockets, motors (RTS3L), bus system actuators. Approvals VDE Cert. No. 40007571,UL E214025, cCSAus 1142018 Technical data of approved types on request. Contact Data RT.3T / RTSET RTS3L Contact arrangement 1 form A (NO) contact Rated voltage 250VAC Max. switching voltage 480VAC Rated current 16A Limiting continuous current 16A 20A Limiting making current, max. 20ms (incand. lamps) 165A peak 120A peak max. 200µs 800A peak Breaking capacity max. 4000VA Contact material Contact style W (pre-make cont.) +pAreg-SmnaOk2e contact AgSnO2 single contact Frequency of operation, with/without load 360/3600h-1 Operate/release time max., DC coil 10/5ms Operate/Reset time max., bistable version 10/10ms Bounce time max. 4ms Contact ratings Type Contact Load Cycles IEC 61810 RTS3L A (NO) 20A, 250VAC resistive, 70°C 20x103 RTS3L monostable A (NO) 16A, 250VAC resistive, ...