Document
General Purpose Relays PCB Relays
Miniature Power PCB RYII & RYII Reflow Solderable
SCHRACK
n 1 pole 8A, 1 form C (CO) or 1 form A (NO) or 1 form B (NC) contact n Low component height 12.3mm n 5kV/8mm coil-contact n Reinforced insulation (protection class II) n Pinnings: 3.2mm and 5mm n Reflow-solderable version n Especially suitable for resistive and inductive loads on
form A (NO) and form B (NC) contacts n Plastic materials according to IEC 60335-1 (domestic appliances)
Typical applications heating control, interface technology, domestic appliances, timers, temperature control
F0142-E
Z
Approvals
VDE Cert. No. 40009639, UL E214025
Technical data of approved types on request
Contact Data
Contact arrangement Rated voltage Max. switching voltage Rated current Breaking capacity max. Contact material Frequency of operation, with/without load Operate/release time max. Bounce time max., form A/form B
1 form C (CO) or 1 form A (NO) or
1 form B (NC) 250VAC 400VAC 8A 2000VA
AgNi0.15, AgSnO2 6/1200min-1 9/5ms 6/10ms
Contact ratings
Type Contact
Load
IEC61810
RY531 A (NO)
8A, 250VAC, 70°C
RY211 A (NO)
8A, 250VAC, 70°C
RY211 B (NC)
8A, 250VAC, 70°C
UL508
RY211 A/B (NO/NC) 10A, 250VAC, general purpose, 70°C
RY211 A (NO)
1/2hp, 240VAC, 85°C
RY211 A/B (NO/NC) B300, 70°C
EN60730-1
RY211 A/B (NO/NC) 6(4)A, 250VAC, 85°C
RY211 A (NO)
8(4)A, 250VAC, 75°C
Mechanical endurance, DC coil
30x106 operations
Cycles 100x103
75x103 50x103 30x103 30x103
6x103 100x103 100x103
Coil Data
Coil voltage range Operative range, IEC 61810
5 to 60VDC 2
Coil versions, DC coil
Coil
Rated
Operate Release
Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
005 5 3.5 0.5 112 223
006 6 4.2 0.6 162 222
009 9 6.3 0.9 320 253
012 12 8.4 1.2 627 230
024 24 16.8 2.4 2350 245
048 48 33.6 4.8 9391 245
060 60 42.0 6.0 14000 257
All figures are given for coil without pre-energization, at ambient temperature +23°C
Other coil voltages on request
Insulation Data
Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base reflow-solderable version
1000Vrms 5000Vrms ≥8/8mm
IIIa PTI250 PTI175
01-2015, Rev. 0115 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company
Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section.
Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.
1
General Purpose Relays PCB Relays
SCHRACK
Miniature Power PCB RYII & RYII Reflow Solderable (Continued)
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
-40 to +70°C
+85°C at 6A
Category of environmental protection
IEC 61810
RTII - flux proof
RTIII - wash tight1)
Vibration resistance (functional),
form A (NO)/form B (NC)
20/5g
Shock resistance (functional)
form A (NO)/form B (NC)
20/5g
Shock resistance (destructive)
100g
Terminal type PCB-THT, PCB-THR
Weight 8g
Resistance to soldering heat THT
IEC 60068-2-20
RTII : 270°C/10s
RTIII : 260°C/5s
Resistance to soldering heat THR
IEC 60068-2-58
250°C, no infrared heating allowed
Packaging/unit
standard version
tube/20 pcs., box/500 pcs.
reflow version
reel/280 pcs.
box/1120 pcs. (4 reels)
1) not available as reflow-solderable version
Accessories
For details see datasheet
Accessories Miniature PCB Relay RY
PCB layout / terminal assignment
Bottom view on solder pins
1 form C (CO) contact, 3.2m m
1 form A (NO), 1 form B (NC) contact 5m m
S0254-AA S0254-AB
S0254-AC
Dimensions
Pinning 3.2mm
S0254-AE
Pinning 5mm
S0274_CA
S0254-AD
S0274-CB
2) Values in brakets are valid for reflow-solderable version
S0254-AF
2
01-2015, Rev. 0115 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company
Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section.
Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.
General Purpose Relays PCB Relays
SCHRACK
Miniature Power PCB RYII & RYII Reflow Soldera.