Document
General Purpose Low Power PCB Relays
Miniature PCB Relay RE
n 1 pole 6 A, 1 form A (NO) contact n Sensitive coil 200 mW n 4 kV coil-contact n Optimized height 10.6mm n PCB area 200mm2 n Wash tight n Product in accordance to IEC 60335-1 (domestic appliances)
SCHRACK
Typical applications PLC’s, timers, temperature control, I/O cards, white goods.
Approvals
VDE Cert. No. 40010578, UL E214025
Technical data of approved types on request.
Contact Data
Contact arrangement
1 form A (NO)
Rated voltage
250VAC
Max. switching voltage
400VAC
Rated current
6A
Limiting making current, max 4s, duty factor 10% 15A
Breaking capacity max.
1500VA
Contact material AgNi 0.15, AgNi 90/10
Frequency of operation, with/without load 360/72000 ops./h
Operate/release time max.
10/5ms
Bounce time max.
4ms
Contact ratings
Type Contact Load
Cycles
IEC 61810
RE034 A (NO) 6A, 250VAC, cosφ=1, 70°C UL 508
100x103
RE034 A (NO) 6A, 250VAC,general purpose, 70°C
100x103
RE034 A (NO) B300 pilot duty 40°C
6x103
Mechanical endurance
>30x106 ops.
Z
Coil Data
Coil voltage range
5 to 48 VDC
Operative range, IEC 61810
2
Coil insulation system according UL1446
F
Coil versions, DC coil
Coil
Rated
Operate Release
Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10%1) mW
5 5 3.5 0.5 125 200
6 6 4.2 0.6 180 200
9 9 6.3 0.9 405 200
12 12 8.4 1.2 720 200
18 18 12.6 1.8 1620 200
24
24 16.8
2.4 28801) 200
48
48 33.6
4.8 115201) 200
1) Coil resistance ±15%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts between contact and coil Initial insulation resistance
14000000VVrrmmss
open contact circuit
>10x109Ω
coil-contact circuit
>10x109Ω
Clearance/creepage
between contact and coil
≥4/4mm
Material group of insulation parts
IIIa
Tracking index of relay base
PTI250V
07-2018, Rev. 0718 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company.
Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section.
Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change.
1
General Purpose Low Power PCB Relays
Miniature PCB Relay RE (Continued)
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Resistance to heat and fire
according EN 60335, par.30
Ambient temperature
-40 to +70°C
-40 to +85°C at 4A
Category of.