Balanced Line Driver ICs
FEATURES
• Balanced, transformer-like floating output
• OutSmarts® technology improves clipping into single-ended loads
...
Description
FEATURES
Balanced, transformer-like floating output
OutSmarts® technology improves clipping into single-ended loads
Stable driving long cables and capacitive loads
High output: 18Vrms into 600 Ω Low noise: -101 dBu Low distortion: 0.0007% @ 1kHz Industry-standard pinout
Balanced Line Driver ICs
THAT 1280, 1283,T1H2A8T6 a1n6d061,2166046_
APPLICATIONS
Differential Line Drivers Audio Mixing Consoles Distribution Amplifiers Hi-Fi Equipment Audio Equalizers Dynamic Range Processors Digital Effects Processors Telecommunications Systems Instrumentation
Description
The THAT 1606 and 1646 are a new generation of monolithic audio differential line drivers offering improved performance over conventional crosscoupled designs. Based on a high-performance, fully differential opamp and laser-trimmed thin-film resistors, both families exhibit low noise and distortion, high slew rate, and wide output swing. The parts are stable when driving difficult loads, and have short-circuit protected outputs.
Designed from the ground up in THAT's complementary dielectric isolation process, both models incorporate THAT's patented OutSmarts1 technology. This is a dual feedback-loop design that prevents the excessive ground currents typical of cross-coupled output stages (CCOS) when clipping into single-ended loads. OutSmarts uses two individual negative-feedback loops to separately control the differential output voltage and common
mode output currents, making the desig...
Similar Datasheet