Document
PSE530
PSE540
Pressure Sensor For General Fluids
Series PSE560
®
RoHS
Series
PSE560
PSE561
PSE563
PSE564
−100 kPa
–101 kPa –100 kPa
Rated pressure range
0 100 kPa
0
0
100 kPa
0
500 kPa
500 kPa
Applicable fluids example
• Argon
• Hydraulic oil • Lubricant
• Air-containing drainage • Silicone oil • Fluorocarbon
• Refrigerant
• Water
• Air
• Nitrogen
• Carbon dioxide
Material of parts
Sitnacinolnetsasctswteitehl f3lu1i6dL
IP65
Copper-free Fluorine-free
Oil-free
((SSiinngglleeddiiaapphhrraaggmmccoonnssttrruuccttiioonn))
1 MPa
1 MPa
Variations
Port type Port size Leakage
Analog output
Thread type
Special fitting type for semiconductors
R1/8, R1/4, Rc1/8, NPT1/8, NPT1/4
URJ1/4, TSJ1/4*
1 x 10–5Pa·m3/s
1 x 10–10Pa·m3/s
1 to 5 V voltage output
4 to 20 mA current output
∗ For URJ1/4, TSJ1/4, refer to “Glossary of Terms/Technical Information” on SMC website or in the Best Pneumatics No. 6.
Application examples
Cleaning lines
Check for working pressure for hydraulic cylinders
Suction verification of workpieces containing moisture
PSE550
PSE560
PSE570
Controller
PSE300 PSE200
Note: When vacuum is released, take precautions to avoid water collision with inertia force. (An adapter with restrictor (ZS-31-X175) is available to prevent water collision with rush inertia.) (Refer to “NOTE” on the Operation Manual at SMC website for details.)
12
Pressure Sensor For General Fluids
Series PSE560
®
RoHS
How to Order
Sensor range
0 Positive pressure [0 to 1 MPa] 1 Vacuum [0 to –101 kPa] 3 Compound pressure [–100 to 100 kPa] 4 Positive pressure [0 to 500 kPa]
PSE56 0
01
Option (Connector)
Nil None Connector for pressure sensor controller (1 pc.)
C2
Note 1) Current output type cannot be connected to the PSE200 series.
Note 2) The connector is not attached to the cable, but is included with the shipment.
Port size
01 R1/8 (with M5 female thread) 02 R1/4 (with M5 female thread) C01 Rc1/8 N01 NPT1/8 (with M5 female thread) N02 NPT1/4 (with M5 female thread) A2 URJ1/4 B2 TSJ1/4
Output specifications
Nil Voltage output type 1 to 5 V 28 Current output type 4 to 20 mA
Option/Part No.
Description Connector for pressure sensor controller Adapter with restrictor Rc1/4 Adapter with restrictor NPT1/4 Adapter with restrictor Rc1/8 Adapter with restrictor NPT1/8
Part no. ZS-28-C ZS-31-X175 ZS-31-X186 ZS-31-X188 ZS-31-X189
Note 1 pc. 1 pc. 1 pc. 1 pc. 1 pc.
Specifications
For Pressure Switch Precautions and Specific Product Precautions, refer to “Handling Precautions for SMC Products” and the Operation Manual on SMC website.
Model Rated pressure range Extension analog output range Proof pressure
PSE560 (Positive pressure) 0 to 1 MPa
–0.1 to 0 MPa 1.5 MPa
PSE561 (Vacuum) 0 to –101 kPa 10.1 to 0 kPa 500 kPa
PSE563 (Compound pressure) PSE564 (Positive pressure)
–100 to 100 kPa
0 to 500 kPa
— –50 to 0 kPa
500 kPa
750 kPa
Model Applicable fluid Power supply voltage Current consumption
PSE56l-l
PSE56l-l-28
Liquid or gas that will not corrode or attack stainless steel 316L
12 to 24 VDC ±10%, Ripple (p-p) 10% or less (with reverse connection protection)
10 mA or less
—
Output specifications
Analog output: 1 to 5 V (within rated pressure range)
Analog output: 4 to 20 mA DC (within rated pressure range)
0.6 to 1 V (within extension analog output range) Maximum load impedance: 500 W or less (at 24 VDC)
Output impedance: Approx. 1 kW
100 W or less (at 12 VDC)
Environment
Accuracy (Ambient temperature at 25°C) Linearity Repeatability Power supply voltage effect
Enclosure Operating temperature range Operating humidity range Withstand voltage Insulation resistance Temperature characteristics
Sensor cable
Standards
±1% F.S. (within rated pressure range), ±3% F.S. (within extension analog output range) ±0.5% F.S. ±0.2% F.S. ±0.3% F.S. IP65
Operating: –10 to 60°C, Stored: –20 to 70°C (No freezing or condensation) Operating/Stored: 35 to 85% RH (No condensation)
250 VAC for 1 minute between terminals and housing
50 MW or more (50 VDC measured via megohmmeter) between terminals and housing ±2% F.S. (0 to 50°C: 25°C reference), ±3% F.S. (–10 to 60°C: 25°C reference)
PSE56l-l: Oilproof heavy-duty vinyl cable with air tubing, 3 cores, ø5.1, 3 m, Conductor area: 0.2 mm2, Insulator O.D.: 1.12 mm PSE56l-l-28: Oilproof heavy-duty vinyl cable with air tubing, 2 cores, ø5.1, 3 m, Conductor area: 0.2 mm2, Insulator O.D.: 1.12 mm
CE, UL/CSA (E216656), RoHS
Piping Specifications
Model
Port size
Material
Weight
With sensor cable Without sensor cable
13
01 R1/8 M5 x 0.8
193 g 101 g
02 N01 N02 C01 A2
R1/4 M5 x 0.8
NPT1/8 M5 x 0.8
NPT1/4 M5 x 0.8
Rc1/8
URJ1/4
Case: C3604 + Nickel plating, Piping port/Pressure sensor: Stainless steel 316L
200 g
194 g
201 g
187 g
203 g
108 g
102 g
109 g
95 g 111 g
B2 TSJ1/4
193 g 101 g
PSE530
PSE540
Analog output [V] Analog output [mA]
PSE560Pr.