Low Noise Amplifiers
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
LMH6654, LMH6655
SNOS956E – JU...
Description
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
LMH6654, LMH6655
SNOS956E – JUNE 2001 – REVISED AUGUST 2014
LMH6654, LMH6655 Single and Dual Low Power, 250 MHz, Low Noise Amplifiers
1 Features
1 (VS = ±5 V, TJ = 25 °C, Typical Values Unless Specified)
Voltage Feedback Architecture Unity Gain Bandwidth 250 MHz Supply Voltage Range ±2.5V to ±6V Slew Rate 200 V/µsec Supply Current 4.5 mA/channel Input Common Mode Voltage −5.15V to +3.7V Output Voltage Swing (RL = 100 Ω) −3.6V to 3.4V Input Voltage Noise 4.5 nV/√Hz Input Current Noise 1.7 pA/√Hz Settling Time to 0.01% 25 ns
2 Applications
ADC Drivers Consumer Video Active Filters Pulse Delay Circuits xDSL Receiver Pre-amps
3 Description
The LMH6654 and LMH6655 single and dual high speed voltage feedback amplifiers are designed to have unity-gain stable operation with a bandwidth of 250 MHz. They operate from ±2.5 V to ±6 V and each channel consumes only 4.5 mA. The amplifiers feature very low voltage noise and wide output swing to maximize signal-to-noise ratio, and possess a true single supply capability with input common mode voltage range extending 150 mV below negative rail and within 1.3 V of the positive rail. The high speed and low power combination of the LMH6654 and LMH6655 make these products an ideal choice for many portable, high speed applications where power is at a premium.
The LMH6654 and LMH6655 are built on TI’s Advance VIP10™ (Vertical...
Similar Datasheet