KY-033

KY-033 Tracking sensor module KY-033 Tracking sensor module Contents 1 Picture ................................................................................................................................................................. 1 2 Technical data / Short description ....................................................................................................................... 1 3 Pinout ................................................................................................................................................................... 3 4 Code example Arduino ......................................................................................................................................... 3 5 Code example Raspberry Pi ................................................................................................................................. 4 Picture Technical data / Short description The sensor detects if a light reflecting or absorbing area is in front of it. It shows which of the 2 areas it is via digital output, as you can see in the picture below. The Sensitivity (minimum range) of the sensor can be adjusted by the controller. This behavior can be used to automatically follow a line with a robot. Condition 1: Line Tracker is on a line (not reflecting area) [LED on the module: Off] [Sensor signal= Digital On] Export: 16.06.2017 Copyright by Joy-IT - Published under CC BY-NC-SA 3.0 Page 147 of 214 KY-033 Tracking sensor mod...