Document
Resistors
SIL Resistor Network
L Series Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant
Electrical
Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25°C Operating Temperature Range Temperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
Make Possible
All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2)
1%: 22R - 1M; 2%:10R - 5M6; 5%: 10R - 10M ±2%
Optional: ±1% (F Tol.), ±5% (J Tol.) -55°C to +125°C
±100ppm/°C (<50 Ohms = ±250ppm/°C) ±50ppm/°C
100Vdc or √PR ≥10,000 Megohms
Environmental
Thermal Shock plus Power Conditioning Short Time Overload Terminal Strength Moisture Resistance Mechanical Shock Vibration Low Temperature Storage High Temperature Exposure Load Life, 1,000 Hours Resistance to Solder Heat (Per MIL-STD-202, Method 210, Cond.B) Dielectric Withstand Voltage Marking Permanency Lead Solderability Flammability Storage Temperature Range Specifications subject to change without notice.
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
ΔR 0.70% ΔR 0.25% ΔR 0.25% ΔR 0.50% ΔR 0.25% ΔR 0.25% ΔR 0.25% ΔR 0.50% ΔR 1.00% ΔR 0.25% 200V for 1 minute MIL-STD 202, Method 215 MIL-STD 202, Method 208 UL-94V-O Rated -55°C to +150°C
www.ttelectronicsresistors.com
10.14
SIL Resistor Network
L Series
Mechanical
Lead Finish Substrate Material Resistor Material Body Material
Make Possible
SnAgCu Alumina Cermet Conformal Epoxy Resin, red or black
Standard Resistance Values, Ohms Power Derating Curve
-3 Circuit (Isolated Resistors) & -1 Circuits (Bussed Resistors)
Ohms
Code
Ohms
Code
Ohms
Code
22 220 820 821 33K 333
27 270 1K 102 39K 393
33 330 1.2K 122 47K 473
39 390 1.5K 152 51K 513
47 470 1.8K 182 56K 563
51 510 2K 202 68K 683
56 560 2.2K 222 82K 823
68 680 2.7K 272 100K 104
82 820 3.3K 332 120K 124
100 101 3.9K 392 150K 154
120 121 4.7K 472 180K 184
150 151 5.1K 512 200K 204
180 181 5.6K 562 220K 224
200 201 6.8K 682 270K 274
220 221 8.2K 822 330K 334
270 271 10K 103 390K 394
330 331 12K 123 470K 474
390 391 15K 153 510K 514
470 471 18K 183 560K 564
510 511 20K 203 680K 684
560 561 22K 223 820K 824
680 681 27K 273 1Meg 105
-5 Circuit (Dual Terminators)
Ohms R1/R2 180/390 220/270
Code R1/R2 181/391 221/271
Ohms R1/R2 330/390 330/470
Code R1/R2 331/391 331/471
Ohms R1/R2 3K/6.2K
-
Code R1/R2 302/622
-
220/330 221/331 330/680 331/681
-
-
Percent of Rated Power
100 80 60 40 20 0
-0 70
125 150
Degrees C
Power Dissipation, Watts At 70°C
— Resistor (Per Circuit) —
Model
Package
-1
-3
-5
L06 .6 .125 .200 .125
L08 .8 .125 .200 .125
L10 1.0 .125 .200 .125
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com 10.14
SIL Resistor Network
L Series
Outline Dimensions (Inch/mm)
“L” Max.
.100 ± .005 2.54 ± 0.13 Pitch. NonAccumulative
No. of Leads
.200
5.08 Max.
.140 ± .020 3.56 ± 0.51
.020 ± .004 0.51 ± 0.10
.098 2.5
Max.
.012 ± .003 0.31 ± 0.08
Centered on Package
Make Possible
# of Leads Dim. “L”
Max.
4 .40 10.16
Schematics
5 .50 12.70
6 .60 15.24
7 .70 17.78
8 .80 20.32
9 .90 22.86
10 1.00 25.40
11 1.10 27.94
12 1.20 30.48
13 1.30 33.02
14 1.40 35.56
-3 Circuit Isolated Resistors
-1 Circuit Bussed Resistors
1234
n 1234
-5 Circuit Dual Terminator
R2 R1
1234
n
n
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com 10.14
SIL Resistor Network
L Series
Typical Part Marking
Make Possible
4 Leads Only
B 104
Date Code
Lead #1 Indicator Logo
Resistance Code Circuit Type & I.D. Code
Lead #1 Indicator Logo L 8 3 S 103
Date Code
Model Series
Number Of Leads
Resistance Code Circuit Type
Packaging
Standard: Option:
Bulk:
Quantity =
4 -10 pins: 200 per bag, 1000 per box 11 -14 pins: 100 per bag, 500 per box
Tape in Ammo Box (4 - 10 pins only). All Units oriented with lead #1 to the left of direction of feed.
Tape:
Width Pitch
= 18mm = 12.7mm
Ammo Box: Capacity =
1,000 units per box. 12,000 units per carton
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com 10.14
.