Document
DC/DC Converters
TEN 4 Series, 4 Watt
Features ◆ Ultra-wide 4:1 input range
9 – 36 VDC or 18 – 75 VDC
◆ Full SMD design
not recommended for new design in
◆ High efficiency up to 85 %
◆ Indefinite short circuit protection
◆ Reverse voltage protection
◆ I/O isolation 1‘500 VDC
◆ Input filter meets EN 55022, Class A
and FCC, Level A without external
components
◆ Shielded metal case with insulated
baseplate
◆ 24-pin DIP with industry standard pinout
◆ MTTF >1 Mio. h
◆ 3-year product warranty
The TEN 4 series DC/DC converter is designed for applications requiring very wide operating voltage range. Typical applications are tele-and data communication systems, mobile battery powered equipments and industrial process control systems with operation from different input voltages i.e. 12/24 VDC or 24/48 VDC battery voltages. High efficiency allows operation up to +75°C at full load. Input filtering according to EN 55022-A and FCC, level A. Low output ripple minisme design-in time and cost.
Models
Ordercode TEN 4-2410 TEN 4-2411 TEN 4-2412 TEN 4-2413 TEN 4-2421 TEN 4-2422 TEN 4-2423 TEN 4-4810 TEN 4-4811 TEN 4-4812 TEN 4-4813 TEN 4-4821 TEN 4-4822 TEN 4-4823
Input voltage range
9 – 36 VDC (24 VDC nominal)
18 – 75 VDC (48 VDC nominal)
Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC
±5 VDC ±12 VDC ±15 VDC
Output current max. 900 mA 660 mA 330 mA 265 mA ±300 mA ±165 mA ±130 mA 900 mA 660 mA 330 mA 265 mA
±300 mA ±165 mA ±130 mA
Efficiency typ. 77 % 81 % 83 % 83 % 80 % 83 % 83 % 78 % 82 % 85 % 85 %
82 % 85 % 85 %
http://www.tracopower.com
Page 1 of 3
DC/DC Converters
TEN 4 Series
4 Watt
Input Specifications
Input current no load / full load
24 Vin models 20 mA typ. / 400 mA typ. (at 12 VDC Vin)
20 mA typ. / 200 mA typ. (at 24 VDC Vin)
48 Vin models 6 mA typ. / 200 mA typ. (at 24 VDC Vin)
6 mA typ. / 100 mA typ. (at 48 VDC Vin)
Start-up voltage / under voltage shut down
24 Vin models 8.5 VDC / 8.0 VDC typ. 48 Vin models 17 VDC / 16 VDC typ.
Surge voltage (1 sec. max.)
24 Vin models 50 V max. 48 Vin models 100 V max.
Reverse voltage protection 1.0 A max.
Conducted noise (input) EN 55022 level A, FCC part 15, level A
Output Specifications
Voltage set accuracy ±1.0 %
Regulation
– Input variation Vin min. to Vin max. 0.3 % max. – Load variation 10 – 100 % single output models 1.0 % max. dual output models 1.0 % max. balanced load 3.0 % max. unbalanced load
Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max.
Temperature coefficient ±0.02 %/K
Current limitation >110 % of Iout max., constant current
Short circuit protection Hiccup mode, indefinite (automatic recovery)
Capacitive load
– Single output models 3000 µF max.
– Dual output models
680 µF max.
General Specifications
Temperature ranges
– Operating –40°C to +75°C – Casing temperature +95°C max. – Storage –40°C to +125°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTTF (MIL-HDBK-217F @ +25°C, ground benign) >1 Mio. h
Isolation voltage (60 sec.) – Input/Output 1’500 VDC
Isolation capacity
– Input/Output 380 pF typ.
Isolation resistance
– Input/Output (500 VDC) >1‘000 M Ohm
Switching frequency 350 kHz typ. (Pulse frequency modulation PFM)
Safety standards UL 1950 , IEC/EN 60950
Compliance up to 60 VDC input voltage (SELV limit)
Safety approvals
– UL/cUL www.ul.com > UL File no.: E188913
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com
Page 2 of 3
DC/DC Converters
TEN 4 Series
4 Watt
Physical Specifications
Casing material Steel chrome-nickel plated Baseplate material Epoxy Potting material Silicon rubber TSE (UL 94V-0 rated) Weight 16.2 g (0.57 oz) Soldering temperature max. 265°C / 10 sec.
Outline Dimensions
4.54 ±0.5
(0.18 ±0.02)
2.54 (0.1)
23 2 22 3
Bottom view
31.8 ±0.5 (1.25 ±0.02) 22.86 (0.9)
5.08 15.24 (0.6)
(0.2)
Insulated Baseplate
4.1
(0.16)
0.5
(0.02)
10 ±0.5
(0.4 ±0.02)
2.4 ±0.5
(0.09 ±0.02)
16 9 14 11
15.22 (0.6)
20.3 ±0.5
(0.8 ±0.02)
Pin-Out
Pin Single
Dual
2 –Vin (GND) –Vin (GND)
3 –Vin (GND) –Vin (GND)
9 No pin Common
11 No function
–Vout
14 +Vout
+Vout
16 –Vout
Common
22 +Vin (Vcc) +Vin (Vcc)
23 +Vin (Vcc) +Vin (Vcc)
Dimensions in [mm], () = Inch Pin diameter ø 0.5 ±0.05 (0.02 ±0.002) Tolerances ±0.5 (±0.02) Pin pitch tolerances ±0.35 (±0.014)
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Rev. December 6. 2010
Page 3 of 3
.