MOC2A60-10

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MOC2A60–10/D POWER OPTO™ Isolator 2 Amp Zero–Cross Triac Output This device consists of a gallium arsenide infrared emitting diode optically coupled to a zero–cross triac driver circuit and a power triac. It is capable of driving a load of up to 2 amps (rms) directly, on line voltages from 20 to 280 volts ac (rms). Provides Normally Open Solid State AC Output with 2 Amp Rating 70 Amp Single Cycle Surge Capability Zero–Voltage Turn–on and Zero–Current Turn–off High Input–Output Isolation of 3750 vac (rms) Static dv/dt Rating of 400 Volts/µs Guaranteed 2 Amp Pilot Duty Rating Per UL508 W117 (Overload Test) and W118 (Endurance Test) [File No. 129224] CSA Approved [File No. CA77170–1]. SEMKO Approved Certificate #9507228 Exceeds NEMA 2–230 and IEEE472 Noise Immunity Test Requirements (See Fig.14) DEVICE RATINGS (TA = 25°C unless otherwise noted) Rating Symbol Value Unit INPUT LED Forward Current — Maximum Continuous Forward Current — Maximum Peak (PW = 100µs, 120 pps) IF IF(pk) 50 1.0 mA A Reverse Voltage — Maximum OUTPUT TRIAC Output Terminal Voltage — Maximum Transient (1) Operating Voltage Range — Maximum Continuous (f = 47 – 63 Hz) VR 6.0 V VDRM VT 600 20 to 280 V(pk) Vac(rms) On–State Current Range (Free Air, Power Factor ≥ 0.3) IT(rms) 0.03 to 2.0 A Non–Repetitive Single Cycle Surge Current — Maximum Peak (t = 16.7 ms) Main Terminal Fusing Current (t = 8.3 ms) I...