MOC2R60-10

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MOC2R60–10/D Advance Information POWER OPTO™ Isolator 2 Amp RandomĆPhase Triac Output MOC2R60-10* MOC2R60-15 This device consists of a gallium arsenide infrared emitting diode optically coupled to a random phase triac driver circuit and a power triac. It is capable of driving a load of up to 2 amps (rms) directly, on line voltages from 20 to 280 volts AC (rms). Provides Normally Open Solid State AC Output with 2 Amp Rating 70 Amp Single Cycle Surge Capability Phase Controllable High Input-Output Isolation of 3750 vac (rms) Static dv/dt Rating of 400 Volts/µs Guaranteed 2 Amp Pilot Duty Rating Per UL508 W117 (Overload Test) and W118 (Endurance Test) [File No. 129224] CSA Approved [File No. CA77170-1]. VDE Approval in Process. Exceeds NEMA 2-230 and IEEE472 Noise Immunity Test Requirements (See Figure 17) DEVICE RATINGS (TA = 25°C unless otherwise noted) Rating Symbol Value Unit INPUT LED *Motorola Preferred Devices OPTOISOLATOR 2 AMPS RANDOM–PHASE TRIAC OUTPUT 600 VOLTS CASE 417-02 79 Style 2 PLASTIC PACKAGE 23 Forward Current — Maximum Continuous Forward Current — Maximum Peak (PW = 100µs, 120 pps) Reverse Voltage — Maximum OUTPUT TRIAC IF IF(pk) VR 50 mA 1.0 A CASE 417A-02 Style 1 6.0 V PLASTIC PACKAGE Output Terminal Voltage — Maximum Transient (1) Operating Voltage Range — Maximum Continuous (f = 47 – 63 Hz) On-State Current Range (Free Air, Power Factor ≥ 0.3) V...