Current Transducer
Current Transducer HO-P series IPN = 6, 10, 25 A
Ref: HO 6-P, HO 10-P, HO 25-P
For the electronic measurement of curre...
Description
Current Transducer HO-P series IPN = 6, 10, 25 A
Ref: HO 6-P, HO 10-P, HO 25-P
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Features
●● Hall effect measuring principle ●● Galvanic separation between primary and secondary circuit ●● Insulated test voltage 4300 V ●● Low power consumption ●● Single power supply +5 V ●● Fixed offset & sensitivity ●● Over-current detect 2.63 × IPN (peak value) ●● Memory check.
Advantages
●● Small size and space saving ●● Only one design for wide primary current range ●● High immunity to external interference ●● 8 mm creepage /clearance ●● High insulation capability ●● Fast response.
Applications
●● AC variable speed drives ●● Static converters for DC motor drives ●● Battery supplied applications ●● Uninterruptible Power Supplies (UPS) ●● Switched Mode Power Supplies (SMPS) ●● Power supplies for welding applications ●● The solar inverter on DC side of the inverter (MPPT) ●● Combiner box.
Standards
●● EN 50178: 1997 ●● IEC 61010-1: 2010 ●● IEC 61326-1: 2012 ●● UL 508: 2010.
Application Domain
●● Industrial.
N°74.54.09.000.0, N°74.54.13.000.0, N°74.54.19.000.0
21October2014/Version 3
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice
Page 1/12
www.lem.com
HO-P series
Absolute maximum ratings
Parameter Supply voltage (not operating)
Primary conductor temperature ESD rating, Human Body...
Similar Datasheet