HLSR40-P

Current Transducer HLSR-P/SP33 series IPN = 10 ... 50 A Ref: HLSR 10-P/SP33, HLSR 20-P/SP33, HLSR 32-P/SP33, HLSR 40-P/SP33, HLSR 50-P/SP33 For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features ●● Open loop multi-range current transducer ●● Voltage output ●● Galvanic separation between primary and secondary ●● Low power consumption ●● Compact design for through-hole PCB mounting ●● Factory calibrated ●● High bandwidth, very low loss magnetic core. Special feature ●● Single supply +3.3 V. Advantages ●● Extremely low profile: h = 12 mm ●● Low foot-print ●● Low offset drift ●● Over-drivable Vref. Applications ●● AC variable speed and servo motor drives ●● Static converters for DC motor drives ●● Battery supplied applications ●● Uninterruptible Power Supplies (UPS) ●● Switched Mode Power Supplies (SMPS) ●● Power supplies for welding applications ●● Combiner box ●● MPPT. Standards ●● EN 50178: 1997 ●● IEC 61010-1: 2010 ●● IEC 61326-1: 2012 ●● UL 508: 2010. Application Domain ●● Industrial. N°97.J3.13.033.0, N°97.J3.17.033.0, N°97.J3.J3.033.0, N°97.J3.23.033.0, N°97.J3.25.033.0 7September2015/Version 7 LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice Page 1/12 www.lem.com HLSR-P/SP33 series Absolute maximum ratings Parameter Supply voltage (not destructive) Supply voltage (not entering non standard modes) Primar...