1.2A 15V H-Bridge motor driver
NXP Semiconductors Technical Data
1.2 A 15 V H-Bridge motor driver IC
The 17510 is a monolithic H-Bridge designed to be ...
Description
NXP Semiconductors Technical Data
1.2 A 15 V H-Bridge motor driver IC
The 17510 is a monolithic H-Bridge designed to be used in portable electronic applications such as digital and SLR cameras to control small DC motors. The 17510 can operate efficiently with supply voltages as low as 2.0 V to as high as 15 V. Its low RDS(on) H-Bridge output MOSFETs (0.45 Ω typical) can provide continuous motor drive currents of 1.2 A and handle peak currents up to 3.8 A. It is easily interfaced to low-cost MCUs via parallel 5.0 V compatible logic. The device can be pulse width modulated (PWMed) at up to 200 kHz. This device contains an integrated charge pump and level shifter (for gate drive voltages), integrated shoot-through current protection (cross-conduction suppression logic and timing), and undervoltage detection and shutdown circuitry. The 17510 has four operating modes: Forward, Reverse, Brake, and Tri-stated (high-impedance). This device is powered by SMARTMOS technology.
Features
2.0 V to 15 V continuous operation Output current 1.2 A (DC), 3.8 A (peak) 450 mΩ RDS(on) H-Bridge MOSFETs 5.0 V TTL-/CMOS-compatible inputs PWM frequencies up to 200 kHz Undervoltage shutdown Cross-conduction suppression
Document Number: MPC17510 Rev. 6.0, 7/2016
17510
H-BRIDGE MOTOR DRIVER
EJ Suffix (Pb-Free) 98ASH70455A
24-LEAD TSSOP
EJ Suffix (Pb-Free) 98ASA00887D 20-pin TSSOP
with exposed pad
5.0 V 15 V
17510
VDD VM C1L GOUT C1H C2L C2H CRES OUT1
MOTOR
EN
MCU
GIN OUT2 IN1
IN2 GN...
Similar Datasheet