Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
bq76925
SLUSAM9D – JULY 2011 –...
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
bq76925
SLUSAM9D – JULY 2011 – REVISED OCTOBER 2016
bq76925 Host-Controlled Analog Front End for 3-Series to 6-Series Cell Li-Ion/Li-Polymer Battery Protection and Gas Gauging Applications
1 Features
1 Analog Interface for Host Cell Measurement – Cell Input MUX, Level Shifter, and Scaler – 1.5-/ 3.0-V Low-Drift, Calibrated Reference Allows Accurate Analog-to-Digital Conversions
Analog Interface for Host Current Measurement – Variable Gain Current Sense Amplifier Capable of Operation with 1-mΩ Sense Resistor
Switchable Thermistor Bias Output for Host Temperature Measurements
Overcurrent Comparator With Dynamically Adjustable Threshold – Alerts Host to Potential Overcurrent Faults – Wakes up Host on Load Connect
Integrated Cell Balancing FETs – Individual Host Control – 50 mA per Cell Balancing Current
Supports Cell Sense-Line Open Wire Detection Integrated 3.3-V
Regulator for Powering Micro-
Controller or LEDs I2C Interface for Host Communications
– Optional Packet CRC for Robust Operation Supply Voltage Range From 4.2 to 26.4 V Low Power Consumption
– 40 µA Typical in Normal Mode – 1.5 µA Maximum in Sleep Mode 20-Pin TSSOP or 24-Pin VQFN Package
2 Applications
Primary Protection in Li-Ion Battery Packs – Cordless Power Tools – Light Electric Vehicles (E-Bike, Scooter, and so forth) – UPS Systems – Medical Equipment – Portable Test Equipment
3 Description
The bq76...