REED RELAYS. 9104 Datasheet

9104 Datasheet PDF, Equivalent


Part Number

9104

Description

HIGH VOLTAGE SIP REED RELAYS

Manufacture

COTO

Total Page 2 Pages
PDF Download
Download 9104 Datasheet PDF


9104 Datasheet
9104 SERIES/HIGH VOLTAGE SIP REED RELAYS
9104 Series Hi Voltage SIP Reed Relays
Molded SIP relays are the industry standard when high reliability and consistent
performance are desired in a compact package. The 9104 Series adds high voltage
switching capability and high voltage standoff capability to a SIP relay package. These
high voltage, high performance relays are ideally suited for Automatic Test Equipment,
Instrumentation, Battery Management, Solar and Process Control applications where
voltage isolation is a key design requirement.
9104 Series Features
u High voltage switching up to 1000 V
u High dielectric strength (up to 4000 V DC)
u High Insulation Resistance – 1011Ω minimum
u High reliability, hermetically sealed contacts for long life
u High speed switching compared to electromechanical relays
u Molded thermoset body on integral lead frame design
u Optional Coil Suppression Diode – protects coil drive circuits
u Magnetic Shield – reduces interaction
u UL File #E67117 - Contact factory for details
u RoHS compliant
DIMENSIONS
in Inches (Millimeters)
TOP VIEW
.103 Typ.
(2.6)
PIN #1
.154 Typ.
(3.9)
.950 Max.
(24.13)
.120
(3.0)
1
35
7
.300
(7.62)
.200
(5.08)
.018 Typ.
(.46)
.300
(7.62)
.020 Typ.
.(.51)
.125± .005
(3.17± .13 )
.245 Max.
(6.22)
.320 Max.
(8.13)
.010 Typ.
(.25)
Ordering Information
Part Number 9XXX-XX-XX
Model Number
General Options
9104
0=No Diode
1=Diode2
Coil Voltage
05=5 volts 12=12 volts
Dielectric
Contacts
Strength (Min) Shield to Coil
1=2000/3000
3=3000/3000
4=4000/4000
08242018
tel: (401) 943.2686 | fax: (401) 942.0920

9104 Datasheet
MODEL NUMBER
Parameters
COIL SPECS.
Nom. Coil Voltage
Max. Coil Voltage
Coil Resistance
Operate Voltage
Release Voltage
CONTACT RATINGS
Switching Voltage3
Switching Current
Carry Current
Contact Rating
Life Expectancy-Typical1
Static Contact
Resistance (max. init.)
Dynamic Contact
Resistance (max. init.)
RELAY SPECIFICATIONS
Insulation Resistance
(minimum)
Capacitance - Typical
Across Open Contacts
Open Contact to Coil
Dielectric Strength4
(minimum)
Operate Time -
including bounce - Typical
Release Time - Typical
Test Conditions
Units
91042
4 Pin SIP
+/- 10%, 25° C
Must Operate by
Must Release by
VDC
VDC
Ω
VDC - Max.
VDC - Min.
5 12
6.5 15.0
175 500
3.75 9.0
0.5 1.0
5 12
6.5 15.0
140 500
3.75 9.0
0.5 1.0
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
Signal Level 1.0V, 10mA
50mV, 10mA
0.5V, 50mA
at 100 Hz, 1.5 msec
Volts
Amps
Amps
Watts
x 106 Ops.
Ω
Ω
1000
0.5
1.3
10
300
0.150
0.200
Between all Isolated Pins
at 100V, 25°C, 40% RH
Ω
1011
No Shield
pF
1.0
No Shield
Between Contacts
Contacts/Shield to Coil
At Nominal Coil Voltage,
30 Hz Square Wave
pF
VDC/peak AC
VDC/peak AC
msec.
msec.
Top View:
Dot stamped on top of relay refers to pin #1 location
Grid = .1”x.1” (2.54mm x 2.54mm)
2000 / 3000
2000 / 3000
-
0.75
0.5
1
3
4000
4000
Notes:
1 Consult factory for life expectancy at other switching loads.
2 Optional diode is connected to pin #3(+) and pin #5(-). Correct coil polarity must be observed.
3 Switch current limited to 1.0mA @ 1000V.
4 Dielectric Strength
9104-XX-1X
9104-XX-3X
9104-XX-4X
VDC/peak AC
2000/3000
3000/3000
4000/4000
5
7
Environmental Ratings:
Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C; Solder Temp: 270°C max; 10 sec. max
All electrical parameters measured at 25°C unless otherwise specified.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s
For most recent data visit www.cotorelay.com
COTO TECHNOLOGY, INC.
08242018


Features Datasheet pdf 9104 SERIES/HIGH VOLTAGE SIP REED RELAYS 9104 Series Hi Voltage SIP Reed Relays Molded SIP relays are the industry sta ndard when high reliability and consist ent performance are desired in a compac t package. The 9104 Series adds high vo ltage switching capability and high vol tage standoff capability to a SIP relay package. These high voltage, high perf ormance relays are ideally suited for A utomatic Test Equipment, Instrumentatio n, Battery Management, Solar and Proces s Control applications where voltage is olation is a key design requirement. 91 04 Series Features u High voltage switc hing up to 1000 V u High dielectric str ength (up to 4000 V DC) u High Insulati on Resistance – 1011Ω minimum u High reliability, hermetically sealed conta cts for long life u High speed switchin g compared to electromechanical relays u Molded thermoset body on integral lea d frame design u Optional Coil Suppress ion Diode – protects coil drive circu its u Magnetic Shield – reduces interaction u UL File #E67117 - Cont.
Keywords 9104, datasheet, pdf, COTO, HIGH, VOLTAGE, SIP, REED, RELAYS, 104, 04, 4, 910, 91, 9, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)