NFC ISO 15693 Sensor Transponder
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
RF430FRL152H, RF430FRL153H, RF...
Description
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
RF430FRL152H, RF430FRL153H, RF430FRL154H
SLAS834C – NOVEMBER 2012 – REVISED DECEMBER 2014
RF430FRL15xH NFC ISO 15693 Sensor Transponder
1 Device Overview
1.1 Features
1
ISO/IEC 15693, ISO/IEC 18000-3 (Mode 1) Compliant RF Interface
Power Supply System With Either Battery or 13.56-MHz H-Field Supply
14-Bit Sigma-Delta Analog-to-Digital Converter (ADC)
Internal Temperature Sensor Resistive Sensor Bias Interface CRC16 CCITT Generator MSP430™ Mixed-Signal Microcontroller
– 2KB of FRAM – 4KB of SRAM – 8KB of ROM – Supply Voltage Range: 1.45 V to 1.65 V – Low Power Consumption
Active Mode (AM): 140 µA/MHz (1.5 V) Standby Mode (LPM3): 16 µA – 16-Bit RISC Architecture – Up to 2-MHz CPU System Clock – Compact Clock System 4-MHz High-Frequency Clock
256-kHz Internal Low-Frequency Clock Source
External Clock Input
– 16-Bit Timer_A With Three Capture/Compare Registers
– LV Port Logic
VOL Lower Than 0.15 V at 400 µA VOH Higher Than (VDDB – 0.15 V) at 400 µA Timer_A PWM Signal Available on All Ports
– eUSCI_B Module Supports 3-Wire and 4-Wire SPI and I2C
– 32-Bit Watchdog Timer (WDT_A)
– ROM Development Mode (Map ROM Addresses to SRAM to Enable Firmware Development)
– Full 4-Wire JTAG Debug Interface
For Complete Module Descriptions, See the RF430FRL15xH Family Technical Reference Manual (SLAU506)
For Application Operation and Programming, See the RF430FRL15xH Firm...
Similar Datasheet