TPS2816, TPS2817, TPS2818, TPS2819, TPS2828, TPS2829, SINGLEĆCHANNEL HIGHĆSPEED MOSFET DRIVER
SLVS160C – FEBRUARY 1997 ...
TPS2816, TPS2817, TPS2818, TPS2819, TPS2828, TPS2829, SINGLEĆCHANNEL HIGHĆSPEED MOSFET DRIVER
SLVS160C – FEBRUARY 1997 – REVISED OCTOBER 2002
D Low-Cost Single-Channel High-Speed
MOSFET Driver
D ICC . . . 15-µA Max (TPS2828, TPS2829) D 25-ns Max Rise/Fall Times and 40-ns Max
Propagation Delay . . . 1-nF Load
D 2-A Peak Output Current D 4-V to 14-V Driver Supply Voltage Range;
Internal
Regulator Extends Range to 40 V (TPS2816, TPS2817, TPS2818, TPS2819)
D 5-pin SOT-23 Package D –40°C to 125°C Ambient-Temperature
Operating Range
D Highly Resistant to Latch-ups
TPS2816, TPS2817 TPS2818, TPS2819
DBV PACKAGE
(TOP VIEW)
VDD
1
5 VCC
GND
2
IN 3
4 OUT
TPS2828, TPS2829 DBV PACKAGE (TOP VIEW)
NC 1
5 VCC
description
The TPS28xx single-channel high-speed MOSFET drivers are capable of delivering peak currents of up to 2 A into highly capacitive loads. High switching speeds (tr and tf = 14 ns typ) are obtained with the use of BiCMOS outputs. Typical threshold switching voltages are 2/3 and 1/3 of VCC. The design inherently minimizes shootthrough current.
GND
2
IN 3
4 OUT
NC – No internal connection
A
regulator is provided on TPS2816 through TPS2819 devices to allow operation with supply inputs between
14 V and 40 V. The
regulator output can be used to power other circuits, provided power dissipation does not
exceed package limitations. If the
regulator is not required, VDD (the
regulator input) should be connected to VCC. The TPS2816 and TPS2817 input circuits include an...
