MOSFET Drivers. TPS2818-Q1 Datasheet

TPS2818-Q1 Datasheet PDF, Equivalent


Part Number

TPS2818-Q1

Description

Single-Channel High-Speed MOSFET Drivers

Manufacture

etcTI

Total Page 25 Pages
PDF Download
Download TPS2818-Q1 Datasheet PDF


TPS2818-Q1 Datasheet
www.ti.com
TPS2816-Q1 , TPS2817-Q1, TPS2818-Q1
TPS2819-Q1, TPS2828-Q1, TPS2829-Q1
SPRS289B AUGUST 2005 REVISED SEPTEMBER 2011
Single-Channel High-Speed MOSFET Drivers
Check for Samples: TPS2816-Q1 , TPS2817-Q1, TPS2818-Q1, TPS2819-Q1, TPS2828-Q1, TPS2829-Q1
FEATURES
1
Qualified for Automotive Applications
Customer-Specific Configuration Control Can
Be Supported Along With Major-Change
Approval
Low-Cost Single-Channel High-Speed MOSFET
Driver
15-mA Max ICC (TPS2828, TPS2829)
25-ns Max Rise/Fall Times and 40-ns Max
Propagation Delay. . . 1-nF Load
2-A Peak Output Current
4-V to 14-V Driver Supply-Voltage Range,
Internal Regulator Extends Range to 40 V
(TPS2816, TPS2817, TPS2818, TPS2819)
5-pin SOT-23 Package
• –40°C to 125°C Ambient-Temperature
Operating Range
Highly Resistant to Latch-Ups
TPS2816, TPS2817
TPS2818, TPS2819
DBV PACKAGE
(TOP VIEW)
VDD
1
5 VCC
GND 2
IN 3
4 OUT
TPS2828, TPS2829
DBV PACKAGE
(TOP VIEW)
NC 1
5 VCC
GND 2
IN 3
4 OUT
NC No internal connection
DESCRIPTION
The TPS28xx single-channel high-speed MOSFET drivers are capable of delivering peak currents of up to 2 A
into highly capacitive loads. High switching speeds (tr and tf = 14 ns typ) are obtained with the use of BiCMOS
outputs. Typical threshold switching voltages are two-thirds and one-third of VCC. The design inherently
minimizes shoot-through current.
A regulator is provided on TPS2816 through TPS2819 devices to allow operation with supply inputs between 14V
and 40V. The regulator output can be used to power other circuits, provided power dissipation does not exceed
package limitations. If the regulator is not required, VDD (the regulator input) should be connected to VCC. The
TPS2816 and TPS2817 input circuits include an active pullup circuit to eliminate the need for an external resistor
when using open-collector PWM controllers. The TPS2818 and TPS2819 are identical to the TPS2816 and
TPS2817, except that the active pullup circuit is omitted. The TPS2828 and TPS2829 are identical to the
TPS2818 and TPS2819, except that the internal voltage regulator is omitted, allowing quiescent current to drop
to less than 15 µA when the inputs are high or low.
The TPS28xx series devices are available in 5-pin SOT-23 (DBV) packages and operate over an ambient
temperature range of 40°C to 125°C.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 20052011, Texas Instruments Incorporated

TPS2818-Q1 Datasheet
TPS2816-Q1 , TPS2817-Q1, TPS2818-Q1
TPS2819-Q1, TPS2828-Q1, TPS2829-Q1
SPRS289B AUGUST 2005 REVISED SEPTEMBER 2011
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
TA
40°C to 125°C
ORDERING INFORMATION
FUNCTION
PACKAGED DEVICES
SOT-23-5 (DBV)
Inverting driver with active pullup input
TPS2816DBV
Noninverting driver with active pullup input
TPS2817DBV
Inverting driver
TPS2818DBV
Noninverting driver
TPS2819QDBVRQ1
Inverting driver, no regulator
TPS2828DBV
TOP-SIDE MARKING
PREVIEW
PREVIEW
PREVIEW
PAYI
PREVIEW
FUNCTIONAL BLOCK DIAGRAM
TPS2816, TPS2818
TPS2817, TPS2819
VDD
Active Pullup
(TPS2816 Only)
IN
GND
VREG
VCC
OUT
VDD
Active Pullup
(TPS2817 Only)
IN
GND
VREG
VCC
OUT
IN
GND
TPS2828
VCC
OUT
IN
GND
TPS2829
VCC
OUT
INPUT STAGE DIAGRAM
VCC
Predrive
OUTPUT STAGE DIAGRAM
VCC
IN
To Drive
Stage
OUT
2 Submit Documentation Feedback
Copyright © 20052011, Texas Instruments Incorporated
Product Folder Link(s): TPS2816-Q1 TPS2817-Q1 TPS2818-Q1 TPS2819-Q1 TPS2828-Q1 TPS2829-Q1


Features Datasheet pdf www.ti.com TPS2816-Q1 , TPS2817-Q1, TPS 2818-Q1 TPS2819-Q1, TPS2828-Q1, TPS2829 -Q1 SPRS289B – AUGUST 2005 – REVISE D SEPTEMBER 2011 Single-Channel High-Sp eed MOSFET Drivers Check for Samples: T PS2816-Q1 , TPS2817-Q1, TPS2818-Q1, TPS 2819-Q1, TPS2828-Q1, TPS2829-Q1 FEATUR ES 1 • Qualified for Automotive Appli cations • Customer-Specific Configura tion Control Can Be Supported Along Wit h Major-Change Approval • Low-Cost Si ngle-Channel High-Speed MOSFET Driver 15-mA Max ICC (TPS2828, TPS2829) • 25-ns Max Rise/Fall Times and 40-ns Ma x Propagation Delay. . . 1-nF Load • 2-A Peak Output Current • 4-V to 14-V Driver Supply-Voltage Range, Internal Regulator Extends Range to 40 V (TPS281 6, TPS2817, TPS2818, TPS2819) • 5-pin SOT-23 Package • –40°C to 125°C Ambient-Temperature Operating Range • Highly Resistant to Latch-Ups TPS2816 , TPS2817 TPS2818, TPS2819 DBV PACKAGE (TOP VIEW) VDD 1 5 VCC GND 2 IN 3 4 OUT TPS2828, TPS2829 DBV PACKAGE (TOP VIEW) NC 1 5 VCC GND 2 IN 3 4 OUT NC No int.
Keywords TPS2818-Q1, datasheet, pdf, etcTI, Single-Channel, High-Speed, MOSFET, Drivers, PS2818-Q1, S2818-Q1, 2818-Q1, TPS2818-Q, TPS2818-, TPS2818, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)