Dual Intelligent High-current Self-protected Silicon High-side Switch
NXP Semiconductors Data Sheet: Technical Data
Dual intelligent high-current self-protected silicon high-side switch (4.0...
Description
NXP Semiconductors Data Sheet: Technical Data
Dual intelligent high-current self-protected silicon high-side switch (4.0 mOhm
Document Number: MC33984 Rev. 17.0, 07/2023
33984
The 33984 is a dual self-protected 4.0 mOhm silicon switch used to replace electromechanical relays, fuses, and discrete devices in power management applications. The 33984 is designed for harsh environments, and it includes self-recovery features. The device is suitable for loads with high inrush current, as well as motors and all types of resistive and inductive loads. Programming, control, and diagnostics are implemented via the serial peripheral interface (SPI). A dedicated parallel input is available for alternate and pulse-width modulation (PWM) control of each output. SPI-programmable fault trip thresholds allow the device to be adjusted for optimal performance in the application. The 33984 is packaged in a power-enhanced 12 mm x 12 mm nonleaded PQFN package with exposed tabs.
Features
Dual 4.0 m max. high-side switch with parallel input or SPI control 6.0 V to 27 V operating voltage with standby currents < 5.0 A Output current monitoring with two SPI-selectable current ratios SPI control of overcurrent limit, overcurrent fault blanking time, output OFF
open load detection, output ON/OFF control, watchdog timeout, slew-rates, and fault status reporting SPI status reporting of overcurrent, open and shorted loads, overtemperature, undervoltage and overvoltage shutdown, fail-safe pin ...
Similar Datasheet