Document
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type Series: FK Type: V
High temperature Lead-Free reflow (suffix : A✽)
Features
● Endurance:105 ℃ 2000 h ● Low impedance (40 % to 60 % less than FC series) ● Miniaturized (30 % to 50 % less than FC series) ● Vibration-proof product (30G guaranteed) is available upon request(φ6.3 ≦) ● RoHS compliant
Specifications
Category temp. range
–55 ℃ to +105 ℃
Rated voltage range
6.3 V.DC to 35 V.DC
Capacitance range
4.7 μF to 1500 μF
Capacitance tolerance
±20 % (120 Hz / +20 ℃)
Leakage current
I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
Dissipation factor (tan δ)
Please see the attached characteristics list
Rated voltage (V.DC) 6.3 10 16 25 35
Characteristics at low temperature
Z (–25 ℃) / Z (+20 ℃) 2 2 2 2 2 Z (–40 ℃) / Z (+20 ℃) 3 3 3 3 3
(Impedance ratio at 120 Hz)
Z (–55 ℃) / Z (+20 ℃) 4 4 4 3 3
After applying rated working voltage for 2000 hours at +105 ℃ ± 2 ℃ and then being
stabilized at +20 ℃, capacitors shall meet the following limits.
Endurance
Capacitance change Within ±30 % of the initial value
Dissipation factor(tan δ) ≦ 200 % of the initial limit
Leakage current
Within the initial limit
After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being
Shelf life
stabilized at +20 ℃, capacitors shall meet the limits specified in endurance.
(With voltage treatment)
After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the
Resistance to soldering heat
following limits. Capacitance change Within ±10 % of the initial value
Dissipation factor(tan δ) Within the initial limit
Leakage current
Within the initial limit
AEC-Q200
AEC-Q200 compliant
Frequency correction factor for ripple current
Freq.(Hz) Cap.(μF)
4.7 to 470 680 to 1500
120
0.65 0.70
1k
0.85 0.90
10 k
0.95 0.95
100 k to
1.00 1.00
Marking
Dimensions
Example : 6.3 V.DC 22 μF Marking color : BLACK
Negative polarity marking (–)
Capacitance (μF)
0.3 max.
A±0.2
K (I)
(P)
H B±0.2
φD±0.5
22 j FK
Lot number
R. voltage code j 6.3 A 10 C 16
Series identification
Mark for Lead-Free products (Black dot) Rated voltage code
Unit:V.DC
E 25 V 35
LW
Pressure Relief (φ10 and larger)
()Reference size
Unit:mm
Size code φD
L A、B H
I
WP
K
B
4.0
5.8±0.3
4.3 5.5 max.
1.8
0.65±0.1
1.0
0.35
+0.15 ー0.20
C
5.0
5.8±0.3
5.3 6.5 max.
2.2
0.65±0.1
1.5
0.35
+0.15 ー0.20
D
6.3
5.8±0.3
6.6 7.8 max.
2.6
0.65±0.1
1.8
0.35
+0.15 ー0.20
D8
6.3
7.7±0.3
6.6 7.8 max.
2.6
0.65±0.1
1.8
0.35
+0.15 ー0.20
E
8.0
6.2±0.3
8.3 9.5 max.
3.4
0.65±0.1
2.2
0.35
+0.15 ー0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
・The dimensions of the vibration-proof products, please refer to the page of the mounting specification.
(I)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before.