CIRCUITS. TPS3813J25-EP Datasheet

TPS3813J25-EP Datasheet PDF


Part

TPS3813J25-EP

Description

PROCESSOR SUPERVISORY CIRCUITS

Manufacture

etcTI

Page 18 Pages
Datasheet
Download TPS3813J25-EP Datasheet


TPS3813J25-EP Datasheet
TPS3813J25-EP, TPS3813L30-EP
TPS3813K33-EP, TPS3813I50-EP
www.ti.com
SGLS343A – MAY 2006 – REVISED MAY 2006
PROCESSOR SUPERVISORY CIRCUITS WITH WINDOW-WATCHDOG
FEATURES
Controlled Baseline
– One Assembly/Test Site, One Fabrication
Site
Extended Temperature Performance of -55°C
to 125°C
Enhanced Diminishing Manufacturing
Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree (1)
Window-Watchdog With Programmable Delay
and Window Ratio
6-Pin SOT-23 Package
Supply Current of 9 µA (Typ)
Power On Reset Generator With a Fixed
Delay Time of 25 ms
Precision Supply Voltage Monitor 2.5 V, 3 V,
3.3 V, 5 V
Open-Drain Reset Output
(1) Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
APPLICATIONS
Applications Using DSPs, Microcontrollers,
or Microprocessors
Safety Critical Systems
Automotive Systems
Healing Systems
TPS3813
DBV PACKAGE
(TOP VIEW)
WDI 1
6 RESET
GND 2
5 WDR
WDT 3
4 VDD
ACTUAL SIZE
3,00 mm x 3,00 mm
DESCRIPTION
The TPS3813 family of supervisory circuits provides circuit initialization and timing supervision, primarily for
DSPs and processor-based systems.
During power on, RESET is asserted when supply voltage (VDD) becomes higher than 1.1 V. Thereafter, the
supervisory circuit monitors VDD and keeps RESET active as long as VDD remains below the threshold voltage
(VIT). An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset.
The delay time, td = 25 ms typical, starts after VDD has risen above the threshold voltage (VIT). When the supply
voltage drops below the threshold voltage (VIT), the output becomes active (low) again. No external components
are required. All the devices of this family have a fixed-sense threshold voltage (VIT) set by an internal voltage
divider.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006, Texas Instruments Incorporated

TPS3813J25-EP Datasheet
TPS3813J25-EP, TPS3813L30-EP
TPS3813K33-EP, TPS3813I50-EP
SGLS343A – MAY 2006 – REVISED MAY 2006
TYPICAL OPERATING CIRCUIT
VDD
www.ti.com
CWP
0.1 µF
VDD
WDR RESET
TPS3813
WDT
WDI
GND
R
VDD
RESET
uC
I/O
GND
0.1 µF
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
DESCRIPTION (CONTINUED)
For safety critical applications the TPS3813 family incorporates a so-called window-watchdog with
programmable delay and window ratio. The upper limit of the watchdog time-out can be set by either connecting
WDT to GND, VDD, or using an external capacitor. The lower limit and thus the window ratio is set by connecting
WDR to GND or VDD. The supervised processor now needs to trigger the TPS3813 within this window not to
assert a RESET.
The product spectrum is designed for supply voltages of 2.5 V, 3 V, 3.3 V, and 5 V. The circuits are available in
a 6-pin SOT-23 package.
The TPS3813 devices are characterized for operation over a temperature range of –55°C to 125°C.
TA
–55°C to 125°C
PACKAGE INFORMATION
DEVICE NAME
TPS3813J25MDBVREP
TPS3813L30MDBVREP
TPS3813K33MDBVREP
TPS3813I50MDBVREP
THRESHOLD VOLTAGE
2.25 V
2.64 V
2.93 V
4.55 V
ORDERING INFORMATION
TPS381 3 J 25 DBV R
Reel
Package
Nominal Supply Voltage
Nominal Threshold Voltage
Functionality
Family
MARKING
PLEM
PLFM
PLGM
PLHM
TPS3813 FUNCTION/TRUTH
TABLE
VDD > VIT
0
1
RESET
L
H
2 Submit Documentation Feedback


Features Datasheet pdf TPS3813J25-EP, TPS3813L30-EP TPS3813K33- EP, TPS3813I50-EP www.ti.com SGLS343A – MAY 2006 – REVISED MAY 2006 PRO CESSOR SUPERVISORY CIRCUITS WITH WINDOW -WATCHDOG FEATURES • Controlled Base line – One Assembly/Test Site, One Fa brication Site • Extended Temperature Performance of -55°C to 125°C • En hanced Diminishing Manufacturing Source s (DMS) Support • Enhanced Product-Ch ange Notification • Qualification Ped igree (1) • Window-Watchdog With Prog rammable Delay and Window Ratio • 6-P in SOT-23 Package • Supply Current of 9 µA (Typ) • Power On Reset Generat or With a Fixed Delay Time of 25 ms • Precision Supply Voltage Monitor 2.5 V , 3 V, 3.3 V, 5 V • Open-Drain Reset Output (1) Component qualification in a ccordance with JEDEC and industry stand ards to ensure reliable operation over an extended temperature range. This inc ludes, but is not limited to, Highly Ac celerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic lif.
Keywords TPS3813J25-EP, datasheet, pdf, etcTI, PROCESSOR, SUPERVISORY, CIRCUITS, PS3813J25-EP, S3813J25-EP, 3813J25-EP, TPS3813J25-E, TPS3813J25-, TPS3813J25, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)