Document
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
TPS22930
SLVSBL3B – NOVEMBER 2012 – REVISED FEBRUARY 2016
TPS22930 Ultra Small, Low On-Resistance Load Switch With Controlled Turn-on
1 Features
•1 Integrated Single Channel Load Switch • Ultra Small Four Terminal Wafer-Chip-Scale
Package (Nominal Dimensions Shown, See Addendum for Details – 0.9 mm × 0.9 mm, 0.5 mm Pitch, 0.5 mm
Height (YZV) • Input Voltage Range: 1.4 V to 5.5 V • Ultra Low RON Resistance
– RON = 35 mΩ at VIN = 5 V – RON = 36 mΩ at VIN = 3.6 V – RON = 49 mΩ at VIN = 1.8 V • 2 A Maximum Continuous Switch Current • Low Quiescent Current (< 3 µA) • Low Control Input Threshold Enables Use of 1.2 V/1.8 V/2.5 V/3.3 V Logic • Controlled Slew Rate • Under Voltage Lockout • Reverse Current Protection When Disabled
2 Applications
• Smartphone / Wireless Handsets • Portable Industrial / Medical Equipment • Portable Media Players • Point of Sales Terminals • GPS Navigation Devices • Digital Cameras • Portable Instrumentation
3 Description
The TPS22930 is a small, low RON load switch with controlled turn on. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.4 V to 5.5 V. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage control signals. The TPS22930 is active high enable.
The TPS22930 device provides circuit breaker functionality by disabling the body diode during reverse voltage (also known as reverse current) situations. Reverse current protection is active only when the power-switch is disabled (off). The device disengages the body diode when the output voltage (VOUT) is driven higher than the input (VIN) to stop the flow of current towards the input side of the switch. Additionally, under-voltage lockout (UVLO) protection turns the switch off if the input voltage is too low.
The slew rate of the device is internally controlled in order to avoid inrush current.
The TPS22930 is available in an ultra-small, spacesaving 4-pin CSP package and is characterized for operation over the free-air temperature range of –40°C to 85°C.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (MAX)
TPS22930
DSBGA (4)
0.92 mm × 0.92 mm
(1) For all available packages, see the orderable addendum at the end of the data sheet.
4 Simplified Schematic
Power Supply
CIN
VIN
ON OFF
ON
VOUT
TPS22930
GND
CL RL
GND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.
TPS22930
SLVSBL3B – NOVEMBER 2012 – REVISED FEBRUARY 2016
www.ti.com
Table of Contents
1 Features .................................................................. 1 2 Applications ........................................................... 1 3 Description ............................................................. 1 4 Simplified Schematic.....