DUAL-SLOT PC CARD POWER-INTERFACE SWITCH
TPS2202AI
DUAL-SLOT PC CARD POWER-INTERFACE SWITCH
WITH RESET FOR SERIAL PCMCIA CONTROLLER
SLVS123B – SEPTEMBER 1995 – R...
Description
TPS2202AI
DUAL-SLOT PC CARD POWER-INTERFACE SWITCH
WITH RESET FOR SERIAL PCMCIA CONTROLLER
SLVS123B – SEPTEMBER 1995 – REVISED JANUARY 2001
D Fully Integrated VCC and Vpp Switching for
Dual-Slot PC Card Interface
D P2C 3-Lead Serial Interface Compatible
With CardBus Controllers
D Meets PC Card Standards D RESET Allows System Initialization of PC
Cards
D 12-V Supply Can Be Disabled Except
During 12-V Flash Programming
D Short-Circuit and Thermal Protection D Space-Saving 30-Pin SSOP (DB) Package D Compatible With 3.3-V, 5-V and 12-V PC
Cards
D Power Saving IDD = 83 µA Typ, IQ = 1 µA D Low rDS(on) (160-mΩ VCC Switch) D Break-Before-Make Switching
5V 5V DATA CLOCK LATCH RESET 12V AVPP AVCC AVCC AVCC GND APWR_GOOD RESET 3.3V
DB OR DF PACKAGE (TOP VIEW)
1 30 2 29 3 28 4 27 5 26 6 25 7 24 8 23 9 22 10 21 11 20 12 19 13 18 14 17 15 16
5V NC NC NC NC VDD 12V BVPP BVCC BVCC BVCC BPWR_GOOD OC 3.3V 3.3V
NC – No internal connection
description
The TPS2202AI PC Card power-interface switch provides an integrated power-management solution for two PC Cards. All of the discrete power MOSFETs, a logic section, current limiting, thermal protection, and power-good reporting for PC Card control are combined on a single integrated circuit (IC), using the Texas Instruments LinBiCMOS process. The circuit allows the distribution of 3.3-V, 5-V, and/or 12-V card power by means of the P2C (PCMCIA Peripheral-Control) Texas Instruments nonproprietary serial interface. The current-limiting featu...
Similar Datasheet