Dual EIA-232 Drivers/Receivers
MAX232
SLLS047N – FEBRUARY 1989 – REVISED FEBRUARY 2024
MAX232 Dual EIA-232 Drivers and Receivers
1 Features
• Meets or...
Description
MAX232
SLLS047N – FEBRUARY 1989 – REVISED FEBRUARY 2024
MAX232 Dual EIA-232 Drivers and Receivers
1 Features
Meets or exceeds TIA/EIA-232-F and ITU recommendation V.28
Operates from a single 5V power supply with 1µF charge-pump capacitors
Operates up to 120kbit/s Two drivers and two receivers ±30V Input levels Low supply current: 8mA typical ESD protection exceeds JESD 22
– 2000V Human-body model (A114-A) Upgrade with improved ESD (15kV HBM) and
0.1µF charge-pump capacitors is available with the MAX202 device
2 Applications
TIA/EIA-232-F Battery-powered systems Terminals Modems Computers
3 Description
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/ EIA-232-F voltage levels from a single 5V supply. Each receiver converts TIA/EIA-232-F inputs to 5V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5V, and can accept ±30V inputs. Each driver converts TTL/ CMOS input levels into TIA/EIA-232-F levels.
Package Information
PART NUMBER
PACKAGE(1)
PACKAGE SIZE(2)
SOIC (16)
9.9mm × 6mm
MAX232
SOIC (16) PDIP (16)
10.4mm × 10.3mm 19.3mm × 9mm
SOP (16)
10.2mm × 7.8 mm
(1) For more Information, see Section 11 . (2) The package size (length × width) is a nominal value and
includes pins, where applicable.
5V
POWER
2
TIN
TX
2
TOUT
RS232
2 ROUT
2
RIN
RX
RS232
Simplified Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses a...
Similar Datasheet