Audio Operational Amplifier
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
Reference Design
OPA1652, OPA...
Description
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
Reference Design
OPA1652, OPA1654
SBOS477B – DECEMBER 2011 – REVISED DECEMBER 2016
OPA165x SoundPlus™ Low Noise and Distortion, General-Purpose, FET-Input Audio Operational Amplifiers
1 Features
1 Low Noise: 4.5 nV/√Hz at 1 kHz 3.8 nV/√Hz at 10 kHz
Low Distortion: 0.00005% at 1 kHz Low Quiescent Current:
2 mA per Channel Low Input Bias Current: 10 pA Slew Rate: 10 V/μs Wide Gain Bandwidth: 18 MHz (G = 1) Unity-Gain Stable Rail-to-Rail Output Wide Supply Range:
±2.25 V to ±18 V, or 4.5 V to 36 V Dual and Quad Versions Available Small Package Sizes:
Dual: SO-8 and MSOP-8 Quad: SO-14 and TSSOP-14
2 Applications
Analog and Digital Mixers Audio Effects Processors Musical Instruments A/V Receivers DVD and Blu-Ray™ Players Car Audio Systems
3 Description
The OPA1652 (dual) and OPA1654 (quad) FET-input operational amplifiers achieve a low 4.5-nV/√Hz noise density with an ultra-low distortion of 0.00005% at 1 kHz. The OPA1652 and OPA1654 op amps offer railto-rail output swing to within 800 mV with a 2-kΩ load, which increases headroom and maximizes dynamic range. These devices also have a high output drive capability of ±30 mA.
These devices operate over a very-wide-supply range of ±2.25 V to ±18 V, or 4.5 V to 36 V, on only 2 mA of supply current per channel. The OPA1652 and OPA1654 op amps are unity-gain stable and provide excellent dynamic behavior over a wi...
Similar Datasheet