LCD Bias Supply
www.ti.com
LCD Bias Supply
Check for Samples :TPS65170
TPS65170
SLVSA27 – OCTOBER 2009
FEATURES
1
• 8.6V to 14.7V Inp...
Description
www.ti.com
LCD Bias Supply
Check for Samples :TPS65170
TPS65170
SLVSA27 – OCTOBER 2009
FEATURES
1
8.6V to 14.7V Input Voltage Range 2.8A Boost Converter Switch Current Limit Boost Converter Output Voltages up to 18.5V Boost and Buck Converter Short-Circuit
Protection 1.5A Buck Converter Switch Current Limit Fixed 750kHz Switching Frequency for Buck
and Boost Converters Fixed Buck Converter Soft-Start Programmable Boost Converter Soft-Start Two Charge Pump Controllers to Regulate VGH
and VGL Control Signal for External High-Side MOSFET
Isolation Switch Reset Signal With Programmable Reset Pulse
Duration Thermal Shutdown 28-Pin 5×5 mm QFN Package
The TPS65170 also provides a reset circuit that monitors the buck converter output (VLOGIC) and generates a reset signal for the timing controller during power-up. A control signal can also be generated to control an external MOSFET isolation switch located between the output of the boost converter and the display panel.
Isolation Switch Control
Boost Converter
Buck Converter
Positive LDO Controller
APPLICATIONS
LCD TVs and Monitors
Negative LDO Controller
DESCRIPTION
The TPS65170 provides a simple and economic power supply solution for a wide variety of LCD bias applications.
In typical display panel applications, the boost converter generates the display panel’s source voltage VS, the buck converter generates the system’s logic supply VLOGIC, and the two charge pump controllers regulate the external...
Similar Datasheet