DatasheetsPDF.com

TPS62143 Dataheets PDF



Part Number TPS62143
Manufacturers Texas Instruments
Logo Texas Instruments
Description 3-V to 17-V 2-A Step-Down Converter
Datasheet TPS62143 DatasheetTPS62143 Datasheet (PDF)

Product Folder Order Now Technical Documents Tools & Software Support & Community TPS62140, TPS62140A, TPS62141, TPS62142, TPS62143 SLVSAJ0E – NOVEMBER 2011 – REVISED SEPTEMBER 2016 TPS6214x 3-V to 17-V 2-A Step-Down Converter in 3 × 3 QFN Package 1 Features •1 DCS-ControlTM Topology • Input Voltage Range: 3 V to 17 V • Up to 2-A Output Current • Adjustable Output Voltage from 0.9 V to 6 V • Pin-Selectable Output Voltage (Nominal, +5%) • Programmable Soft Start and Tracking • Seamless Powe.

  TPS62143   TPS62143



Document
Product Folder Order Now Technical Documents Tools & Software Support & Community TPS62140, TPS62140A, TPS62141, TPS62142, TPS62143 SLVSAJ0E – NOVEMBER 2011 – REVISED SEPTEMBER 2016 TPS6214x 3-V to 17-V 2-A Step-Down Converter in 3 × 3 QFN Package 1 Features •1 DCS-ControlTM Topology • Input Voltage Range: 3 V to 17 V • Up to 2-A Output Current • Adjustable Output Voltage from 0.9 V to 6 V • Pin-Selectable Output Voltage (Nominal, +5%) • Programmable Soft Start and Tracking • Seamless Power-Save Mode Transition • Quiescent Current of 17 µA (Typical) • Selectable Operating Frequency • Power-Good Output • 100% Duty-Cycle Mode • Short-Circuit Protection • Over Temperature Protection • Pin to Pin Compatible with TPS62130 and TPS62150 • Available in a 3-mm × 3-mm, VQFN-16 Package 2 Applications • Standard 12-V Rail Supplies • POL Supply From Single or Multiple Li-Ion Battery • Solid-State Disk Drives • Embedded Systems • LDO Replacement • Mobile PCs, Tablet, Modems, Cameras • Server, Microserver • Data Terminal, Point of Sales (ePOS) 3 Description The TPS6214x family is an easy-to-use synchronous step-down DC-DC converter optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response by use of the DCS-Control™ topology. With their wide operating input voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either a Li-Ion or other batteries, as well as from 12-V intermediate power rails. It supports up to 2 A of continuous output current at output voltages between 0.9 V and 6 V (with 100% duty-cycle mode). The output voltage start-up ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the Enable (EN) and open-drain Power Good (PG) pins. In Power Save Mode, the devices draw quiescent current of about 17 μA from VIN. Power Save Mode, entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In Shutdown Mode, the device is turned off and current consumption is less than 2 μA. The device, available in adjustable and fixed output voltage versions, is packaged in a 16-pin VQFN package measuring 3 mm × 3 mm (RGT). Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) TPS6214x VQFN (16) 3.00 mm x 3.00 mm (1) For all available packages, see the orderable addendum at the end of the datasheet. (3 .. 17)V 10uF Typical Application Schematic 3.3nF PVIN SW AVIN VOS EN TPS62141 SS/TR PG FB DEF AGND FSW PGND 2.2 µH 100k 1.8V / 2A 22uF Efficiency vs Output Current 100 90 80 VIN=5V VIN=12V VIN=17V 70 Efficiency (%) Copyright © 2016, Texas Instruments Incorporated 60 50 40 0.0 VOUT=3.3V fsw=1.25MHz 0.4 0.8 1.2 1.6 Output Current (A) 2.0 G001 1 An IMPORTANT NOTICE at the end of this data sheet addresses avai.


TPS62142 TPS62143 TPS62160


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)