QUADRUPLE 8-BIT DIGITAL-TO-ANALOG CONVERTERS
TLC5620C, TLC5620I QUADRUPLE 8-BIT DIGITAL-TO-ANALOG CONVERTERS
D Four 8-Bit Voltage Output DACs D 5-V Single-Supply Op...
Description
TLC5620C, TLC5620I QUADRUPLE 8-BIT DIGITAL-TO-ANALOG CONVERTERS
D Four 8-Bit Voltage Output DACs D 5-V Single-Supply Operation D Serial Interface D High-Impedance Reference Inputs D Programmable 1 or 2 Times Output Range D Simultaneous Update Facility D Internal Power-On Reset D Low-Power Consumption D Half-Buffered Output
SLAS081E – NOVEMBER 1994 – REVISED NOVEMBER 2001
N OR D PACKAGE (TOP VIEW)
GND REFA REFB REFC REFD DATA
CLK
1 2 3 4 5 6 7
14 VDD 13 LDAC 12 DACA 11 DACB 10 DACC 9 DACD 8 LOAD
applications
D Programmable Voltage Sources D Digitally Controlled Amplifiers/Attenuators D Mobile Communications D Automatic Test Equipment D Process Monitoring and Control D Signal Synthesis
description
The TLC5620C and TLC5620I are quadruple 8-bit voltage output digital-to-analog converters (DACs) with buffered reference inputs (high impedance). The DACs produce an output voltage that ranges between either one or two times the reference voltages and GND, and the DACs are monotonic. The device is simple to use, running from a single supply of 5 V. A power-on reset function is incorporated to ensure repeatable start-up conditions.
Digital control of the TLC5620C and TLC5620I are over a simple three-wire serial bus that is CMOS compatible and easily interfaced to all popular microprocessor and microcontroller devices. The 11-bit command word comprises eight bits of data, two DAC-select bits, and a range bit, the latter allowing selection between the times 1 or times 2 output rang...
Similar Datasheet