16-Channel LED Driver
TLC5941
www.ti.com
PWP
RHB
NT SLVS589D – JULY 2005 – REVISED JANUARY 2008
16-CHANNEL LED DRIVER WITH DOT CORRECTION...
Description
TLC5941
www.ti.com
PWP
RHB
NT SLVS589D – JULY 2005 – REVISED JANUARY 2008
16-CHANNEL LED DRIVER WITH DOT CORRECTION AND GRAYSCALE PWM CONTROL
FEATURES
1
2 16 Channels 12-Bit (4096 Steps) Grayscale PWM Control Dot Correction
– 6 Bit (64 Steps) Drive Capability (Constant-Current Sink)
– 0 mA to 80 mA LED Power Supply Voltage up to 17 V VCC = 3.0 V to 5.5 V Serial Data Interface Controlled In-Rush Current 30-MHz Data Transfer Rate CMOS Level I/O Error Information
– LOD: LED Open Detection – TEF: Thermal Error Flag
APPLICATIONS
Monocolor, Multicolor, Full-Color LED Displays LED Signboards Display Back-Lighting
DESCRIPTION
The TLC5941 is a 16-channel, constant-current sink, LED driver. Each channel has an individually adjustable 4096-step grayscale PWM brightness control and a 64-step constant-current sink (dot correction). The dot correction adjusts the brightness variations between LED channels and other LED drivers. Both grayscale control and dot correction are accessible via a serial interface. A single external resistor sets the maximum current value of all 16 channels.
The TLC5941 features two error information circuits. The LED open detection (LOD) indicates a broken or disconnected LED at an output terminal. The thermal error flag (TEF) indicates an overtemperature condition.
VCC GND
SCLK
SIN
XLAT
IREF
Max. OUTn VREF
Current
=1.24V
GSCLK BLANK
GS Counter CNT
0 Status Information:
LOD, TED, DC DATA
191
96 192
96
MODE 10
0
MODE...
Similar Datasheet