TLC59401 Datasheet PDF


Part Number

TLC59401

Description

16-Channel LED Driver

Manufacture

etcTI

Total Page 30 Pages
PDF Download
Download TLC59401 Datasheet PDF


Features Datasheet pdf TLC59401 www.ti.com SBVS137 – DECEMB ER 2009 16-CHANNEL LED DRIVER WITH DOT CORRECTION AND GRAYSCALE PWM CONTROL Check for Samples: TLC59401 FEATURES 1 •23 16 Channels • 12-Bit (4096 Ste ps) Grayscale PWM Control • Dot Corre ction – 6-Bit (64 Steps) • Drive Ca pability (Constant-Current Sink) – 0 mA to 80 mA (VCC ≤ 3.6 V) – 0 mA to 120 mA (VCC > 3.6 V) • LED Power-Sup ply Voltage up to 17 V • VCC = 3.0 V to 5.5 V • Serial Data Interface • Controlled Inrush Current • 30-MHz Da ta Transfer Rate • CMOS Level I/O • Error Information – LOD: LED Open De tection – TEF: Thermal Error Flag AP PLICATIONS • Monocolor, Multicolor, F ull-Color LED Displays • LED Signboards • Display Back-Lighting DESCRIPTIO.
Keywords TLC59401, datasheet, pdf, etcTI, 16-Channel, LED, Driver, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

TLC59401 Datasheet
TLC59401
www.ti.com
SBVS137 – DECEMBER 2009
16-CHANNEL LED DRIVER WITH DOT CORRECTION AND GRAYSCALE PWM CONTROL
Check for Samples: TLC59401
FEATURES
1
23 16 Channels
• 12-Bit (4096 Steps) Grayscale PWM Control
• Dot Correction
– 6-Bit (64 Steps)
• Drive Capability (Constant-Current Sink)
– 0 mA to 80 mA (VCC 3.6 V)
– 0 mA to 120 mA (VCC > 3.6 V)
• LED Power-Supply Voltage up to 17 V
• VCC = 3.0 V to 5.5 V
• Serial Data Interface
• Controlled Inrush Current
• 30-MHz Data Transfer Rate
• CMOS Level I/O
• Error Information
– LOD: LED Open Detection
– TEF: Thermal Error Flag
APPLICATIONS
• Monocolor, Multicolor, Full-Color LED Displays
• LED Signboards
• Display Back-Lighting
DESCRIPTION
The TLC59401 is a 16-channel, constant-current sink,
LED driver. Each channel has an individually
adjustable 4096-step grayscale PWM brightness
control and a 64-step constant-current sink (dot
correction). The dot correction adjusts the brightness
variations between LED channels and other LED
drivers. Both grayscale control and dot correction are
accessible via a serial interface. A single external
resistor sets the maximum current value of all 16
channels.
The TLC59401 features two error information circuits.
The LED open detection (LOD) indicates a broken or
disconnected LED at an output terminal. The thermal
error flag (TEF) indicates an over-temperature
condition.
VCC GND
SCLK
SIN
XLAT
IREF
Max. OUTn VREF
Current
=1.24V
GSCLK
BLANK
GS Counter CNT
0
Status
Information:
LOD,
TED,
DC DATA
191
96
192
96
Temperature
Error Flag
(TEF)
LED Open
Detection
(LOD)
XERR
MODE
10
0
MODE
10
GS Register
11 0
DC Register
50
Input
Shift
Register
192
95
10
MODE
96
96
GS Register
23 12
DC Register
11 6
Input
Shift
Register
191
GS Register
191 180
DC Register
95 90
CNT
12−Bit Grayscale
PWM Control
6−Bit Dot Correction
LED Open Detection
Constant-Current
Driver
Delay
x0
OUT0
CNT
12−Bit Grayscale
PWM Control
6−Bit Dot Correction
Constant-Current
Driver
Delay
x1
OUT1
LED Open Detection
CNT
12−Bit Grayscale
PWM Control
6−Bit Dot Correction
Constant-Current
Driver
Delay
x15
OUT15
LED Open Detection
SOUT
Figure 1. Functional Block Diagram
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments Incorporated.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)