(PDF) SN65HVD07 Datasheet PDF | etcTI





SN65HVD07 Datasheet PDF

Part Number SN65HVD07
Description HIGH OUTPUT RS-485 TRANSCEIVERS
Manufacture etcTI
Total Page 27 Pages
PDF Download Download SN65HVD07 Datasheet PDF

Features: Datasheet pdf www.ti.com SN65HVD05, SN65HVD06 SN75HVD 05, SN65HVD07 SN75HVD06, SN75HVD07 SLLS 533E – MAY 2002 – REVISED AUGUST 20 09 HIGH OUTPUT RS-485 TRANSCEIVERS Chec k for Samples: SN65HVD05, SN65HVD06, SN 75HVD05, SN65HVD07, SN75HVD06, SN75HVD0 7 FEATURES 1 • Minimum Differential Output Voltage of 2.5 V Into a 54-Ω Lo ad • Open-Circuit, Short-Circuit, and Idle-Bus Failsafe Receiver • 1/8th U nit-Load Option Available (Up to 256 No des on the Bus) • Bus-Pin ESD Protect ion Exceeds 16 kV HBM • Driver Output Slew Rate Control Options • Electric ally Compatible With ANSI TIA/EIA-485-A Standard • Low-Current Standby Mode: 1 µA Typical • Glitch-Free Power-Up and Power-Down Protection for Hot-Plug ging Applications • Pin Compatible Wi th Industry Standard SN75176 APPLICATI ONS • Data Transmission Over Long or Lossy Lines or Electrically Noisy Envi ronments • Profibus Line Interface Industrial Process Control Networks Point-of-Sale (POS) Networks • Electric Utility Metering • Building Automation • Digital Mot.

Keywords: SN65HVD07, datasheet, pdf, etcTI, HIGH, OUTPUT, RS-485, TRANSCEIVERS, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

SN65HVD07 datasheet
www.ti.com
SN65HVD05, SN65HVD06
SN75HVD05, SN65HVD07
SN75HVD06, SN75HVD07
SLLS533E MAY 2002 REVISED AUGUST 2009
HIGH OUTPUT RS-485 TRANSCEIVERS
Check for Samples: SN65HVD05, SN65HVD06, SN75HVD05, SN65HVD07, SN75HVD06, SN75HVD07
FEATURES
1
Minimum Differential Output Voltage of 2.5 V
Into a 54-Ω Load
Open-Circuit, Short-Circuit, and Idle-Bus
Failsafe Receiver
1/8th Unit-Load Option Available (Up to 256
Nodes on the Bus)
Bus-Pin ESD Protection Exceeds 16 kV HBM
Driver Output Slew Rate Control Options
Electrically Compatible With ANSI
TIA/EIA-485-A Standard
Low-Current Standby Mode: 1 µA Typical
Glitch-Free Power-Up and Power-Down
Protection for Hot-Plugging Applications
Pin Compatible With Industry Standard
SN75176
APPLICATIONS
Data Transmission Over Long or Lossy Lines
or Electrically Noisy Environments
Profibus Line Interface
Industrial Process Control Networks
Point-of-Sale (POS) Networks
Electric Utility Metering
Building Automation
Digital Motor Control
DIFFERENTIAL OUTPUT VOLTAGE
vs
DIFFERENTIAL OUTPUT CURRENT
5
TA = 25°C
4.5 DE at VCC
4
3.5
60 Load
Line
D at VCC
VCC = 5 V
30 Load
3 Line
2.5
2
1.5
1
0.5
0
0 20 40 60 80 100 120
IOD - Differential Output Current - mA
DESCRIPTION
The SN65HVD05, SN75HVD05, SN65HVD06,
SN75HVD06, SN65HVD07, and SN75HVD07
combine a 3-state differential line driver and
differential line receiver. They are designed for
balanced data transmission and interoperate with
ANSI TIA/EIA-485-A and ISO 8482E
standard-compliant devices. The driver is designed to
provide a differential output voltage greater than that
required by these standards for increased noise
margin. The drivers and receivers have active-high
and active-low enables respectively, which can be
externally connected together to function as direction
control.
The driver differential outputs and receiver differential
inputs connect internally to form a differential input/
output (I/O) bus port that is designed to offer
minimum loading to the bus whenever the driver is
disabled or not powered. These devices feature wide
positive and negative common-mode voltage ranges,
making them suitable for party-line applications.
D OR P PACKAGE
(TOP VIEW)
R1
RE 2
DE 3
D4
8 VCC
7B
6A
5 GND
LOGIC DIAGRAM
(POSITIVE LOGIC)
1
R
2
RE
DE 3
4
D
6A
7B
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 20022009, Texas Instruments Incorporated

SN65HVD07 datasheet
SN65HVD05, SN65HVD06
SN75HVD05, SN65HVD07
SN75HVD06, SN75HVD07
SLLS533E MAY 2002 REVISED AUGUST 2009
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
SIGNALING
RATE
UNIT
LOAD
40 Mbps
10 Mbps
1 Mbps
40 Mbps
10 Mbps
1 Mbps
1/2
1/8
1/8
1/2
1/8
1/8
ORDERING INFORMATION(1)
DRIVER
OUTPUT SLOPE
CONTROL
TA
PART NUMBER(2)
No SN65HVD05D SN65HVD05P
Yes 40°C to 85°C SN65HVD06D SN65HVD06P
Yes SN65HVD07D SN65HVD07P
No SN75HVD05D SN75HVD05P
Yes 0°C to 70°C SN75HVD06D SN75HVD06P
Yes SN75HVD07D SN75HVD07P
MARKED AS
PLASTIC
DUAL-IN-LINE
PACKAGE
(PDIP)
SMALL
OUTLINE
IC (SOIC)
PACKAGE
65HVD05
VP05
65HVD06
VP06
65HVD07
VP07
75HVD05
VN05
75HVD06
VN06
75HVD07
VN07
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) The D package is available taped and reeled. Add an R suffix to the device type (i.e., SN65HVD05DR).
PACKAGE DISSIPATION RATINGS
(See Figure 12 and Figure 13)
PACKAGE
D (2)
D (3)
TA 25°C
POWER RATING
710 mW
1282 mW
P 1000 mW
DERATING FACTOR(1)
ABOVE TA = 25°C
5.7 mW/°C
10.3 mW/°C
8.0 m W/°C
TA = 70°C
POWER RATING
455 mW
821 mW
640 mW
(1) This is the inverse of the junction-to-ambient thermal resistance when board-mounted and with no air flow.
(2) Tested in accordance with the Low-K thermal metric definitions of EIA/JESD51-3
(3) Tested in accordance with the High-K thermal metric definitions of EIA/JESD51-7
TA = 85°C
POWER RATING
369 mW
667 mW
520 mW
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted(1) (2)
Supply voltage range, VCC
Voltage range at A or B
Input voltage range at D, DE, R or RE
Voltage input range, transient pulse, A and B, through 100 Ω (see Figure 11)
Receiver output current, IO
Electrostatic discharge
Human body model(3)
Charged-device model(4)
A, B, and GND
All pins
All pins
Continuous total power dissipation
SN65HVD05, SN65HVD06, SN65HVD07
SN75HVD05, SN75HVD06, SN75HVD07
0.3 V to 6 V
9 V to 14 V
0.5 V to VCC + 0.5 V
50 V to 50 V
11 mA to 11mA
16 kV
4 kV
1 kV
See Dissipation Rating Table
(1) Stresses beyond those listed under "absolute maximum ratingsmay cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under" recommended operating
conditionsis not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal.
(3) Tested in accordance with JEDEC Standard 22, Test Method A114-A.
(4) Tested in accordance with JEDEC Standard 22, Test Method C101.
2 Submit Documentation Feedback
Copyright © 20022009, Texas Instruments Incorporated
Product Folder Link(s): SN65HVD05 SN65HVD06 SN75HVD05 SN65HVD07 SN75HVD06 SN75HVD07




Index : 0  1  2  3   4  5  6  7   8  9  A  B   C  D  E  F   G  H  I  J   K  L  M  N   O  P  Q  R   S  T  U  V   W  X  Y  Z
@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)