DRIVERS/RECEIVERS. SN65HVD3083E Datasheet

SN65HVD3083E Datasheet PDF


Part

SN65HVD3083E

Description

LOW-POWER RS-485 FULL-DUPLEX DRIVERS/RECEIVERS

Manufacture

etcTI

Page 24 Pages
Datasheet
Download SN65HVD3083E Datasheet


SN65HVD3083E Datasheet
www.ti.com
SN65HVD3080E
SN65HVD3083E
SN65HVD3086E
SLLS771E – NOVEMBER 2006 – REVISED NOVEMBER 2012
LOW-POWER RS-485 FULL-DUPLEX DRIVERS/RECEIVERS
Check for Samples: SN65HVD3080E, SN65HVD3083E, SN65HVD3086E
FEATURES
1
• Low Quiescent Power
– 375 μA (Typical) Enabled Mode
– 2 nA (Typical) Shutdown Mode
• Small MSOP Package
• 1/8 Unit-Load—Up to 256 Nodes per Bus
• 16 kV Bus-Pin ESD Protection, 6 kV All Pins
• Failsafe Receiver (Bus Open, Short, Idle)
• TIA/EIA-485A Standard Compliant
• RS-422 Compatible
• Power-Up, Power-Down Glitch-Free Operation
APPLICATIONS
• Motion Controllers
• Point-of-Sale (POS) Terminals
• Rack-to-Rack Communications
• Industrial Networks
• Power Inverters
• Battery-Powered Applications
• Building Automation
DGS PACKAGE
(TOP VIEW)
R
RE
DE
D
GND
1
2
3
4
5
10 VCC
9A
8B
7Z
6Y
D PACKAGE
(TOP VIEW)
NC 1 14 VCC
R 2 13 VCC
RE 3 12 A
DE 4 11 B
D 5 10 Z
GND
6
9Y
GND
7
8 NC
NC - No internal connection
Pins 6 and 7 are connected together internally
Pins 13 and 14 are connected together internally
DESCRIPTION
Each of these devices is a balanced driver and receiver designed for full-duplex RS-485 or RS-422 data bus
networks. Powered by a 5-V supply, they are fully compliant with the TIA/EIA-485A standard.
With controlled bus output transition times, the devices are suitable for signaling rates from 200 kbps to 20 Mbps.
The devices are designed to operate with a low supply current, less than 1 mA (typical), exclusive of the load.
When in the inactive shutdown mode, the supply current drops to a few nanoamps, making these devices ideal
for power-sensitive applications.
The wide common-mode range and high ESD protection levels of these devices make them suitable for
demanding applications such as motion controllers, electrical inverters, industrial networks, and cabled chassis
interconnects where noise tolerance is essential.
These devices are characterized for operation over the temperature range -40°C to 85°C
Enabled ICC
ISL
MAX
TI
350 370 390 410 430 450 470 490 510 530 550
Current - mA
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2012, Texas Instruments Incorporated

SN65HVD3083E Datasheet
SN65HVD3080E
SN65HVD3083E
SN65HVD3086E
SLLS771E – NOVEMBER 2006 – REVISED NOVEMBER 2012
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PART NUMBER
SN65HVD3080E
SN65HVD3083E
SN65HVD3086E
ORDERING INFORMATION
SIGNALING RATE
PACKAGE (1)
200 kbps
1 Mbps
DGS, DGSR 10-pin MSOP (2)
20 Mbps
D 14-pin SOIC
MARKED AS
BTT
BTU
BTF
HVD3086
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
(2) The R suffix indicated tape and reel.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted(1)
VCC
V(A), V(B), V(Y), V(Z)
V(TRANS)
VI
PD
TJ
Supply voltage range(2)
Voltage range at any bus terminal (A, B, Y, Z)
Voltage input, transient pulse through 100 .
See Figure 10 (A, B, Y, Z)
Input voltage range (D, DE, RE)
Continuous total power dissipation
Junction temperature
UNIT
–0.3 V to 7 V
–9 V to 14 V
–50 to 50 V
-0.3 V to VCC+0.3 V
See the dissipation rating table
170°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal.
POWER DISSIPATION RATINGS
PACKAGE
10-pin MSOP (DGS)
14-pin SOIC (D)
TA < 25°C
463 mW
765 mW
DERATING FACTOR(1)
ABOVE TA < 25°C
3.71 mW/°C
6.1 mW/°C
(1) This is the inverse of the junction-to-ambient thermal resistance when board-mounted and with no air flow.
TA = 85°C
241 mW
400 mW
ELECTROSTATIC DISCHARGE PROTECTION
PARAMETER
Human Body Model(1)
TEST CONDITIONS
A,B,Y,Z, and GND
Charged Device Mode(2)
Machine Model(3)
All pins
All pins
All pins
MIN TYP MAX UNIT
16 kV
6 kV
1.5 kV
400 V
(1) Tested in accordance JEDEC Standard 22, Test Method A114-A. Bus pin stressed with respect to a common connection of GND and
VCC.
(2) Tested in accordance JEDEC Standard 22, Test Method C101.
(3) Tested in accordance JEDEC Standard 22, Test Method A115.
2 Submit Documentation Feedback
Copyright © 2006–2012, Texas Instruments Incorporated
Product Folder Links: SN65HVD3080E SN65HVD3083E SN65HVD3086E


Features Datasheet pdf www.ti.com SN65HVD3080E SN65HVD3083E SN 65HVD3086E SLLS771E – NOVEMBER 2006 REVISED NOVEMBER 2012 LOW-POWER RS- 485 FULL-DUPLEX DRIVERS/RECEIVERS Check for Samples: SN65HVD3080E, SN65HVD3083 E, SN65HVD3086E FEATURES 1 • Low Qui escent Power – 375 μA (Typical) Enab led Mode – 2 nA (Typical) Shutdown Mo de • Small MSOP Package • 1/8 Unit- Load—Up to 256 Nodes per Bus • 16 k V Bus-Pin ESD Protection, 6 kV All Pins • Failsafe Receiver (Bus Open, Short , Idle) • TIA/EIA-485A Standard Compl iant • RS-422 Compatible • Power-Up , Power-Down Glitch-Free Operation APPL ICATIONS • Motion Controllers • Poi nt-of-Sale (POS) Terminals • Rack-to- Rack Communications • Industrial Netw orks • Power Inverters • Battery-Po wered Applications • Building Automat ion DGS PACKAGE (TOP VIEW) R RE DE D GND 1 2 3 4 5 10 VCC 9A 8B 7Z 6Y D P ACKAGE (TOP VIEW) NC 1 14 VCC R 2 13 V CC RE 3 12 A DE 4 11 B D 5 10 Z GND 6 9Y GND 7 8 NC NC - No internal connection Pins 6 and 7 are connected together internally Pins 13.
Keywords SN65HVD3083E, datasheet, pdf, etcTI, LOW-POWER, RS-485, FULL-DUPLEX, DRIVERS/RECEIVERS, N65HVD3083E, 65HVD3083E, 5HVD3083E, SN65HVD3083, SN65HVD308, SN65HVD30, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)