Low-Distortion Audio Operational Amplifiers
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
OPA1678, OPA1679
SBOS855C – FEBRU...
Description
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
OPA1678, OPA1679
SBOS855C – FEBRUARY 2017 – REVISED JUNE 2019
OPA167x Low-Distortion Audio Operational Amplifiers
1 Features
1 Low noise: 4.5 nV/√Hz at 1 kHz Low distortion: 0.0001% at 1 kHz High open-loop gain: 114 dB High common-mode rejection: 110 dB Low quiescent current:
– 2 mA per channel Low input bias current: 10 pA (typical) Slew rate: 9 V/μs Wide gain bandwidth: 16 MHz (G = 1) Unity-gain stable Rail-to-rail output Wide supply range:
– ±2.25 V to ±18 V, or 4.5 V to 36 V Dual-channel and quad-channel versions Small package sizes:
– Dual-channel: SO-8, MSOP-8, SON-8 – Quad-channel: SO-14, TSSOP-14, QFN-16
2 Applications
Analog signal conditioning Analog and digital mixers Audio effects pedals A/V receivers Car audio systems
3 Description
The OPA1678 (dual-channel) and OPA1679 (quadchannel) operational amplifiers offer higher systemlevel performance over legacy op amps commonly used in audio circuitry. The OPA167x amplifiers achieve a low 4.5-nV/√Hz noise density and low distortion of 0.0001% at 1 kHz, which improves audio signal fidelity. They also offer rail-to-rail output swing to within 800 mV with a 2-kΩ load, which increases headroom and maximizes dynamic range.
The OPA1678 and OPA1679 operate over a very wide supply range of ±2.25 V to ±18 V or (4.5 V to 36 V) on only 2 mA of supply current to accommodate the power supply constraints of many...
Similar Datasheet