Chip Capacitors. X7R2220 Datasheet

X7R2220 Datasheet PDF, Equivalent


Part Number

X7R2220

Description

Surface Mount Multilayer Ceramic Chip Capacitors

Manufacture

Vishay

Total Page 5 Pages
PDF Download
Download X7R2220 Datasheet


X7R2220 Datasheet
www.vishay.com
VJ Safety Certified Capacitors X7R
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Safety Certified Applications
FEATURES
• Approved IEC 60384-14
• Specialty: safety certified capacitors
• AEC-Q200 qualified available with PPAP for
size 2008 and 2220
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
Available
APPLICATIONS
• Power supplies
• EMI and AC line filtering
• EV charging systems
• AC equipment and appliances
• Lighting strike and voltage surge protection
• Isolators
• Facsimile and telephone
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range X1 / Y2 (1): 100 pF to 4.7 nF
Capacitance Range X2 (1): 100 pF to 12 nF
Voltage Range: 250 VAC
Temperature Coefficient of Capacitance (TCC):
± 15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF) (1):
C < 100 pF: 8 % maximum
C 100 pF: 2.5 % maximum
Note
(1) Test conditions per IEC 60384-14:
Voltage: 1.0 VRMS
C < 100 pF at 1 MHz
C 100 pF at 1 kHz
Insulating Resistance:
at +25 °C 100 000 Mmin. or 1000 F whichever is less
at +125 °C 10 000 Mmin. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Voltage Proof Test:
X1 / Y2: min. 1500 VAC
X2: min. 1075 VDC
Peak Impulse Voltage:
X1 / Y2: 5000 V
X2: 2500 V
Voltage Rating DC:
X1 / Y2: 2000 VDC
X2: 1500 VDC
Climatic Category According to EN 60068-1:
55/125/21
Revision: 05-Apr-2019
1 Document Number: 45020
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

X7R2220 Datasheet
www.vishay.com
VJ Safety Certified Capacitors X7R
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CASE
MAXIMUM VOLTAGE
(VAC)
CAPACITANCE
MINIMUM
MAXIMUM
X7R (X1 / Y2)
2008
2220
250
100 pF
1.0 nF
250
270 pF
4.7 nF
X7R (X2)
2008
2220
250
100 pF
2.7 nF
250
270 pF
12 nF
Notes
• Detail ratings see “Selection Chart”
• Size 2008 is compatible with 1808 solderlands and full conform with the IEC-60384-14 requirements for creepage distance
ORDERING INFORMATION
VJ2008
Y
102
K
XU
CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION AC VOLTAGE
CODE
NOMINAL CODE TOLERANCE
RATING
S
MARKING
T
PACKAGING
### (1)(2)
PROCESS
CODE
2008
2220
Y = X7R
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a multiplier.
Examples:
102 = 1000 pF
K = ± 10 %
M = ± 20 %
X = Ni barrier
100 % tin plated
U = 250 VAC
S = marked
(see Part Marking
table below)
T = 7" reel /
plastic tape
X1 = X1 / Y2
X2 = X2
Vishay
automotive
grade per
customer
request
add “A”:
X1A = X1 / Y2
X2A = X2
Notes
(1) Process code must be added to control products and requirements
(2) Vishay automotive grade “X1A” and “X2A” only for size 2008 and 2220
• Detail ratings see “Selection Chart”
PART MARKING
MARKING
VA
VM
1ST DIGIT
MANUFACTURER
V = Vishay
2ND DIGIT
DIELECTRIC AND RATING
A = X7R, X1 / Y2
M = X7R, X2
DIMENSIONS in inches (millimeters)
L
W
CASE
CODE
2008
2220
PART ORDERING
NUMBER
VJ2008
VJ2220
P
LENGTH
(L)
0.200 ± 0.010
(5.08 ± 0.25)
0.220 ± 0.008
(5.59 ± 0.20)
WIDTH
(W)
0.080 ± 0.010
(2.03 ± 0.25)
0.200 ± 0.010
(5.08 ± 0.25)
T
MAX.
MAXIMUM
THICKNESS
(T)
0.086
(2.18)
0.086
(2.18)
TERMINATION
(P)
MINIMUM
MAXIMUM
0.010
(0.25)
0.030
(0.76)
0.010
(0.25)
0.030
(0.76)
Revision: 05-Apr-2019
2 Document Number: 45020
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


Features Datasheet pdf www.vishay.com VJ Safety Certified Capa citors X7R Vishay Vitramon Surface Mou nt Multilayer Ceramic Chip Capacitors f or Safety Certified Applications FEATU RES • Approved IEC 60384-14 • Speci alty: safety certified capacitors • A EC-Q200 qualified available with PPAP f or size 2008 and 2220 • Wet build pro cess • Reliable Noble Metal Electrode (NME) system • Material categorizati on: for definitions of compliance pl ease see www.vishay.com/doc?99912 Avai lable APPLICATIONS • Power supplies • EMI and AC line filtering • EV ch arging systems • AC equipment and app liances • Lighting strike and voltage surge protection • Isolators • Fac simile and telephone ELECTRICAL SPECIF ICATIONS Note • Electrical characteri stics at +25 °C unless otherwise speci fied Operating Temperature: -55 °C to +125 °C Capacitance Range X1 / Y2 (1): 100 pF to 4.7 nF Capacitance Range X2 (1): 100 pF to 12 nF Voltage Range: 250 VAC Temperature Coefficient of Capacitance (TCC): ± 15 % from -55 °C to +125 °C, with 0 VDC ap.
Keywords X7R2220, datasheet, pdf, Vishay, Surface, Mount, Multilayer, Ceramic, Chip, Capacitors, 7R2220, R2220, 2220, X7R222, X7R22, X7R2, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)