Power Switch. OB2354 Datasheet

OB2354 Datasheet PDF, Equivalent


Part Number

OB2354

Description

Current Mode PWM Power Switch

Manufacture

On-Bright Electronics

Total Page 10 Pages
PDF Download
Download OB2354 Datasheet


OB2354 Datasheet
OB2354
Current Mode PWM Power Switch Freq Shuffling
GENERAL DESCRIPTION
OB2354 combines a dedicated current mode PWM
controller with a high voltage power MOSFET. It
is optimized for high performance, low standby
power, and cost effective off-line flyback converter
applications in sub 20W range.
OB2354 offers complete protection coverage with
automatic self-recovery feature including Cycle-by-
Cycle current limiting (OCP), over load protection
(OLP), VDD over voltage clamp and under voltage
lockout (UVLO). Excellent EMI performance is
achieved with On-Bright proprietary frequency
shuffling technique together with soft switching
control at the totem pole gate drive output.
The tone energy at below 20KHZ is minimized in the
design and audio noise is eliminated during operation.
OB2354 is offered in DIP8 package.
FEATURES
Power on Soft Start Reducing MOSFET Vds
Stress
Frequency shuffling for EMI
Extended Burst Mode Control For Improved
Efficiency and Minimum Standby Power Design
Audio Noise Free Operation
Fixed 50KHZ Switching Frequency
Internal Synchronized Slope Compensation
Low VDD Startup Current and Low Operating
Current
Leading Edge Blanking on Current Sense Input
Good Protection Coverage With Auto Self-
Recovery
o VDD Over Voltage Clamp and Under Voltage
Lockout with Hysteresis (UVLO)
o On-Bright Proprietary Line Input Compensated
Cycle-by-Cycle Over-current Threshold Setting
For Constant Output Power Limiting Over
Universal Input Voltage Range.
o Overload Protection (OLP).
o Over voltage Protection(OVP)
APPLICATIONS
Offline AC/DC flyback converter for
Battery Charger
PDA power supplies
Digital Cameras and Camcorder Adaptor
VCR, SVR, STB, DVD&DVCD Player SMPS
Set-Top Box Power
Auxiliary Power Supply for PC and Server
Open-frame SMPS
TYPICAL APPLICATION
Output Power Table
Product
OB2354
230VAC±15%
Open Frame1
21W
85-265VAC
Open Frame1
16W
Notes:
1. Maximum practical continuous power in an open frame design with sufficient drain pattern as a heat sink, at 50ambient.
©On-Bright Electronics
-1-
Confidential
OB_DOC_DS_5401

OB2354 Datasheet
OB2354
Current Mode PWM Power Switch Freq Shuffling
GENERAL INFORMATION
Pin Configuration
The OB2354 is offered in DIP8 package as shown
below.
Ordering Information
Part Number Description
OB2354AP DIP8, Pb-free
Package Dissipation Rating
Package
DIP8
RθJA (/W)
75
Note: Drain Pin Connected to 100mm2 PCB copper clad.
Absolute Maximum Ratings
Parameter
Drain Voltage (off state)
VDD Voltage
VDD-G Input Voltage
VDD Clamp Continuous
Current
FB Input Voltage
Sense Input Voltage
Min/Max Operating Junction
Temperature TJ
Min/Max Storage Temperature
Tstg
Lead Temperature (Soldering,
10secs)
Value
-0.3V to 650V
-0.3V to 30 V
-0.3V to 30 V
10mA
-0.3 to 7V
-0.3 to 7V
-20 to 150
-55 to 160
260
Note: Stresses beyond those listed under “absolute maximum
ratings” may cause permanent damage to the device. These are
stress ratings only, functional operation of the device at these or
any other conditions beyond those indicated under “recommended
operating conditions” is not implied. Exposure to absolute
maximum-rated conditions for extended periods may affect device
reliability.
Marking Information
©On-Bright Electronics
-2-
Confidential
OB_DOC_DS_5401


Features Datasheet pdf OB2354 Current Mode PWM Power Switch Fre q Shuffling GENERAL DESCRIPTION OB2354 combines a dedicated current mode PWM controller with a high voltage power MO SFET. It is optimized for high performa nce, low standby power, and cost effect ive off-line flyback converter applicat ions in sub 20W range. OB2354 offers co mplete protection coverage with automat ic self-recovery feature including Cycl e-byCycle current limiting (OCP), over load protection (OLP), VDD over voltage clamp and under voltage lockout (UVLO) . Excellent EMI performance is achieved with On-Bright proprietary frequency s huffling technique together with soft s witching control at the totem pole gate drive output. The tone energy at below 20KHZ is minimized in the design and a udio noise is eliminated during operati on. OB2354 is offered in DIP8 package. FEATURES ■ Power on Soft Start Reduci ng MOSFET Vds Stress ■ Frequency shuf fling for EMI ■ Extended Burst Mode C ontrol For Improved Efficiency and Minimum Standby Power Design ■ Aud.
Keywords OB2354, datasheet, pdf, On-Bright Electronics, Current, Mode, PWM, Power, Switch, B2354, 2354, 354, OB235, OB23, OB2, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)