3.3V RS-485 TRANSCEIVERS
www.ti.com
SN65HVD10-EP, SN65HVD11-EP SN65HVD12-EP
SGLS278E – DECEMBER 2004 – REVISED SEPTEMBER 2007
3.3 V RS-485 TRANS...
Description
www.ti.com
SN65HVD10-EP, SN65HVD11-EP SN65HVD12-EP
SGLS278E – DECEMBER 2004 – REVISED SEPTEMBER 2007
3.3 V RS-485 TRANSCEIVERS
FEATURES
1
Controlled Baseline
– One Assembly/Test Site
– One Fabrication Site
Extended Temperature Performance of Up to –40°C to 125°C and –55°C to 125°C
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree (1)
Operates With a 3.3 V Supply
Bus-Pin ESD Protection Exceeds 16 kV HBM
1/8 Unit-Load Option Available (Up to 256 Nodes on the Bus)
Optional Driver Output Transition Times for Signaling Rates of 1 Mbps, 10 Mbps, and 25 Mbps (2)
Meets or Exceeds the Requirements of ANSI TIA/EIA-485-A
Bus-Pin Short Circuit Protection From –7 V to 12 V
Low-Current Standby Mode . . . 1 μA (Typ)
Open-Circuit, Idle-Bus, and Shorted-Bus Failsafe Receiver
Thermal Shutdown Protection
Glitch-Free Power-Up and Power-Down Protection for Hot-Plugging Applications
SN75176 Footprint
(1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
(2) The signaling ra...
Similar Datasheet