ADM1030

a FEATURES Optimized for Pentium® III: Allows Reduced Guardbanding Software and Automatic Fan Speed Control Automatic Fan Speed Control Allows Control Independent of CPU Intervention after Initial Setup Control Loop Minimizes Acoustic Noise and Battery Consumption Remote Temperature Measurement Accurate to 1؇ C Using Remote Diode 0.125 ؇C Resolution on Remote Temperature Channel Local Temperature Sensor with 0.25؇C Resolution Pulsewidth Modulation Fan Control (PWM) Programmable PWM Frequency Programmable PWM Duty Cycle Tach Fan Speed Measurement Analog Input To Measure Fan Speed of 2-Wire Fans (Using Sense Resistor) 2-Wire System Management Bus (SMBus) with ARA Support Overtemperature THERM Output Pin Programmable INT Output Pin Configurable Offset for All Temperature Channels 3 V to 5.5 V Supply Range Shutdown Mode to Minimize Power Consumption APPLICATIONS Notebook PCs, Network Servers and Personal Computers Telecommunications Equipment Intelligent Temperature Monitor and PWM Fan Controller ADM1030* PRODUCT DESCRIPTION The ADM1030 is an ACPI-compliant two-channel digital thermometer and under/over temperature alarm, for use in computers and thermal management systems. Optimized for the Pentium III, the higher 1°C accuracy offered allows systems designers to safely reduce temperature guardbanding and increase system performance. A Pulsewidth Modulated (PWM) Fan Control output controls the speed of a cooling fan by varying output duty cycle. Duty cycle values between 33%–10...