Document
TPS7201Q, TPS7225Q, TPS7230Q
TPS7233Q, TPS7248Q, TPS7250Q, TPS72xxY
MICROPOWER LOW-DROPOUT (LDO) VOLTAGE REGULATORS
SLVS102G – MARCH 1995 – REVISED JUNE 2000
D Available in 5-V, 4.85-V, 3.3-V, 3.0-V, and
2.5-V Fixed-Output and Adjustable Versions
D Dropout Voltage <85 mV Max at
IO = 100 mA (TPS7250)
D Low Quiescent Current, Independent of
Load, 180 µA Typ
D 8-Pin SOIC and 8-Pin TSSOP Package D Output Regulated to ± 2% Over Full
Operating Range for Fixed-Output Versions
D Extremely Low Sleep-State Current,
0.5 µA Max
D Power-Good (PG) Status Output
description
D, P, OR PW PACKAGE (TOP VIEW)
SENSE†/FB‡ RESET/PG GND EN
1 2 3 4
8 OUT 7 OUT 6 IN 5 IN
† SENSE – Fixed voltage options only (TPS7225, TPS7230, TPS7233, TPS7248, and TPS7250)
‡ FB – Adjustable version only (TPS7201)
600 TA = 25°C
500
VDO – Dropout Voltage – mV
The TPS72xx family of low-dropout (LDO) voltage regulators offers the benefits of low-dropout voltage, micropower operation, and miniaturized packaging. These regulators feature extremely
400
TPS7225 TPS7230
low dropout voltages and quiescent currents compared to conventional LDO regulators.
300
TPS7233
Offered in small-outline integrated-circuit (SOIC) packages and 8-terminal thin shrink small-outline
200
TPS7248
(TSSOP), the TPS72xx series devices are ideal
for cost-sensitive designs and for designs where board space is at a premium.
100
TPS7250
A combination of new circuit design and process innovation has enabled the usual pnp pass transistor to be replaced by a PMOS device. Because the PMOS pass element behaves as a
0 0 50 100 150 200 250 IO – Output Current – mA
low-value resistor, the dropout voltage is very low – maximum of 85 mV at 100 mA of load current (TPS7250) – and is directly proportional to the
Figure 1. Typical Dropout Voltage Versus Output Current
load current (see Figure 1). Since the PMOS pass element is a voltage-driven device, the quiescent current is very low (300 µA maximum) and is stable over the entire range of output load current (0 mA to 250 mA). Intended for use in portable systems such as laptops and
cellular phones, the low-dropout voltage and micropower operation result in a significant increase in system
battery operating life.
The TPS72xx also features a logic-enabled sleep mode to shut down the regulator, reducing quiescent current
to 0.5 µA maximum at TJ = 25°C. Other features include a power-good function that reports low output voltage and may be used to implement a power-on reset or a low-battery indicator.
The TPS72xx is offered in 2.5-V, 3-V, 3.3-V, 4.85-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 9.75 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges (3% for adjustable version).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
•POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 2000, Texas Instruments Incorporated 1
TPS7201Q, TPS7225Q, TPS7230Q
TPS7233Q, TPS7248Q, TPS7250Q, TPS72xxY
MICROPOWER LOW-DROPOUT (LDO) VOLTAGE REGULATORS
SLVS102G – MARCH 1995 – REVISED JUNE 2000
AVAILABLE OPTIONS
TJ
OUTPUT VOLTAGE (V)
MIN TYP MAX
PACKAGED DEVICES
SMALL OUTLINE (D)
PDIP (P)
TSSOP (PW)
CHIP FORM (Y)
4.9
5 5.1
TPS7250QD
TPS7250QP
TPS7250QPWR
TPS7250Y
4.75 4.85 4.95
TPS7248QD
TPS7248QP
TPS7248QPWR
TPS7248Y
3.23 3.3 3.37
– 55°C to 150°C
2.94
3 3.06
TPS7233QD TPS7230QD
TPS7233QP TPS7230QP
TPS7233QPWR TPS7230QPWR
TPS7233Y TPS7230Y
2.45 2.5 2.55
TPS7225QD
TPS7225QP
TPS7225QPWR
TPS7225Y
Adjustable 1.2 V to 9.75 V
TPS7201QD
TPS7201QP
TPS7201QPWR
TPS7201Y
The D package is available taped and reeled. Add R suffix to device type (e.g., TPS7250QDR). The PW package is only available left-end taped and reeled. The TPS7201Q is programmable using an external resistor divider (see application information). The chip form is tested at 25°C.
TPS72xx‡
VI 0.1 µF
5 IN
2 PG
61 IN SENSE
7 OUT
4 EN
8 OUT
GND 3
PG 250 kΩ VO
CO (see Note A) + 10 µF
CSR = 1 Ω
‡ TPS7225Q, TPS7230Q, TPS7233Q, TPS7248Q, TPS7250Q (fixed-voltage options)
NOTE A: Capacitor selection is nontrivial. See application information section for details.
Figure 2. Typical Application Configuration
•2 POST OFFICE BOX 655303 DALLAS, TEXAS 75265
TPS7201Q, TPS7225Q, TPS7230Q
TPS7233Q, TPS7248Q, TPS7250Q, TPS72xxY
MICROPOWER LOW-DROPOUT (LDO) VOLTAGE REGULATORS
SLVS102G – MARCH 1995 – REVISED JUNE 2000
TPS72xx chip information
These chips, when properly assembled, display .