TPS75101ĆEP, '75115ĆEP, '75118ĆEP, '75125ĆEP, '75133ĆEP WITH POWER GOOD TPS75301ĆEP, TPS75315ĆEP, TPS75318ĆEP, TPS75325Ć...
TPS75101ĆEP, '75115ĆEP, '75118ĆEP, '75125ĆEP, '75133ĆEP WITH POWER GOOD TPS75301ĆEP, TPS75315ĆEP, TPS75318ĆEP, TPS75325ĆEP, TPS75333ĆEP WITH RESET
FASTĆTRANSIENTĆRESPONSE 1.5ĆA LOWĆDROPOUT VOLTAGE
REGULATORS SGLS158 − APRIL 2003
D Controlled Baseline
− One Assembly/Test Site, One Fabrication Site
D Enhanced Diminishing Manufacturing
Sources (DMS) Support
D Enhanced Product Change Notification D Qualification Pedigree† D 1.5-A Low-Dropout Voltage
Regulator D Available in 1.5-V, 1.8-V, 2.5-V, 3.3-V, Fixed
Output and Adjustable Versions
D Open Drain Power-Good (PG) Status
Output (TPS751xxQ)
D Open Drain Power-On Reset With 100-ms
Delay (TPS753xxQ)
D Dropout Voltage Typically 160 mV at 1.5 A
(TPS75133Q)
† Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
D Ultralow 75 µA Typical Quiescent Current D Fast Transient Response D 2% Tolerance Over Specified Conditions
For Fixed-Output Versions
D 20-Pin TSSOP (PWP) PowerPAD Package D Thermal Shutdown Protection
GND/HEATSINK NC IN IN EN
PG or RESET† FB/SENSE OUTPUT OUTPUT
GND/HEATSINK
PWP PACKAGE (TOP VIEW)
...