CYW20730 Transceiver Datasheet

CYW20730 Datasheet PDF, Equivalent


Part Number

CYW20730

Description

Single-Chip Bluetooth Transceiver

Manufacture

Cypress Semiconductor

Total Page 30 Pages
PDF Download
Download CYW20730 Datasheet PDF


CYW20730
CYW20730
Single-Chip Bluetooth Transceiver for
Wireless Input Devices
The Cypress CYW20730 is a Bluetooth 3.0-compliant, stand-alone baseband processor with an integrated 2.4 GHz transceiver. It is
ideal for wireless input device applications including game controllers, keyboards, 3D glasses, remote controls, gestural input devices,
and sensor devices. Built-in firmware adheres to the Bluetooth Human Interface Device (HID) profile and Bluetooth Device ID profile
specifications.
The CYW20730 radio has been designed to provide low power, low cost, and robust communications for applications operating in the
globally available 2.4 GHz unlicensed ISM band. It is fully compliant with Bluetooth Radio Specification 3.0.
The single-chip Bluetooth transceiver is a monolithic component implemented in a standard digital CMOS process and requires
minimal external components to make a fully compliant Bluetooth device. The CYW20730 is available in three package options: a 32-
pin, 5 mm × 5 mm QFN, a 40-pin, 6 mm × 6 mm QFN, and a 64-pin, 7 mm × 7 mm BGA.
Cypress Part Numbering Scheme
Cypress is converting the acquired IoT part numbers from Broadcom to the Cypress part numbering scheme. Due to this conversion,
there is no change in form, fit, or function as a result of offering the device with Cypress part number marking. The table provides
Cypress ordering part number that matches an existing IoT part number.
Table 1. Mapping Table for Part Number between Broadcom and Cypress
Broadcom Part Number
BCM20730
BCM20730A2KML2GT
BCM20730A1KML2G
BCM20730A1KMLG
BCM20730A1KFBGT
BCM20730A2KFBG
BCM20730A1KFBG
BCM20730A1KML2GT
BCM20730A2KML2G
BCM20730A1KMLGT
BCM20730A2KFBGT
Cypress Part Number
CYW20730
CYW20730A2KML2GT
CYW20730A1KML2G
CYW20730A1KMLG
CYW20730A1KFBGT
CYW20730A2KFBG
CYW20730A1KFBG
CYW20730A1KML2GT
CYW20730A2KML2G
CYW20730A1KMLGT
CYW20730A2KFBGT
Acronyms and Abbreviations
In most cases, acronyms and abbreviations are defined on first use.
For a comprehensive list of acronyms and other terms used in Cypress documents, go to http://www.cypress.com/glossary.
Applications
Wireless pointing devices: mice, trackballs, gestural controls
Wireless keyboards
3D glasses
Remote controls
Game controllers
Point-of-sale (POS) input devices
Remote sensors
Home automation
Personal health and fitness monitoring
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 002-14824 Rev. *J
• San Jose, CA 95134-1709 • 408-943-2600
Revised April 25, 2017

CYW20730
CYW20730
Features
On-chip support for common keyboard and mouse interfaces
eliminates external processor
Programmable keyscan matrix interface, up to 8 × 20 key-
scanning matrix
3-axis quadrature signal decoder
Shutter control for 3D glasses
Infrared modulator
IR learning
Triac control
Triggered Broadcom Fast Connect
Supports Adaptive Frequency Hopping
Excellent receiver sensitivity
Bluetooth specification 3.0 compatible, including enhanced
power control (Unicast Connectionless Data)
Bluetooth HID profile version 1.0 compliant
Bluetooth Device ID profile version 1.3 compliant
Bluetooth AVRCP-CT profile version 1.3 compliant
10-bit auxiliary ADC with 28 analog channels
On-chip support for serial peripheral interface (master and
slave modes)
Broadcom Serial Communications (BSC) interface (compatible
with Philips® (now NXP) I2C slaves)
Programmable output power control meets Class 2 or Class 3
requirements
Class 1 operation supported with external PA and T/R switch
Integrated ARM Cortex™-M3 based microprocessor core
On-chip power-on reset (POR)
Support for EEPROM and serial flash interfaces
Integrated low-dropout regulator (LDO)
On-chip software controlled power management unit
Three package types are available:
32-pin QFN package (5 mm × 5 mm)
40-pin QFN package (6 mm × 6 mm)
64-pin BGA package (7 mm × 7 mm)
RoHS compliant
Document Number: 002-14824 Rev. *J
Page 2 of 50


Features  CYW20730 Single-Chip Bluetooth Trans ceiver for Wireless Input Devices The Cypress CYW20730 is a Bluetooth 3.0-com pliant, stand-alone baseband processor with an integrated 2.4 GHz transceiver. It is ideal for wireless input device applications including game controllers , keyboards, 3D glasses, remote control s, gestural input devices, and sensor d evices. Built-in firmware adheres to th e Bluetooth Human Interface Device (HID ) profile and Bluetooth Device ID profi le specifications. The CYW20730 radio h as been designed to provide low power, low cost, and robust communications for applications operating in the globally available 2.4 GHz unlicensed ISM band. It is fully compliant with Bluetooth R adio Specification 3.0. The single-chip Bluetooth transceiver is a monolithic component implemented in a standard dig ital CMOS process and requires minimal external components to make a fully com pliant Bluetooth device. The CYW20730 i s available in three package options: a 32pin, 5 mm × 5 mm QFN, a.
Keywords CYW20730, datasheet, pdf, Cypress Semiconductor, Single-Chip, Bluetooth, Transceiver, YW20730, W20730, 20730, CYW2073, CYW207, CYW20, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)