EPM3128A

June 2006, ver. 3.5 ® MAX 3000A Programmable Logic Device Family Data Sheet Features... ■ High–performance, low–cost CMOS EEPROM–based programmable logic devices (PLDs) built on a MAX® architecture (see Table 1) ■ 3.3-V in-system programmability (ISP) through the built–in IEEE Std. 1149.1 Joint Test Action Group (JTAG) interface with advanced pin-locking capability – ISP circuitry compliant with IEEE Std. 1532 ■ Built–in boundary-scan test (BST) circuitry compliant with IEEE Std. 1149.1-1990 ■ Enhanced ISP features: – Enhanced ISP algorithm for faster programming – ISP_Done bit to ensure complete programming – Pull-up resistor on I/O pins during in–system programming ■ High–density PLDs ranging from 600 to 10,000 usable gates ■ 4.5–ns pin–to–pin logic delays with counter frequencies of up to 227.3 MHz ■ MultiVoltTM I/O interface enabling the device core to run at 3.3 V, while I/O pins are compatible with 5.0–V, 3.3–V, and 2.5–V logic levels ■ Pin counts ranging from 44 to 256 in a variety of thin quad flat pack (TQFP), plastic quad flat pack (PQFP), plastic J–lead chip carrier (PLCC), and FineLine BGATM packages ■ Hot–socketing support ■ Programmable interconnect array (PIA) continuous routing structure for fast, predictable performance ■ Industrial temperature range Table 1. MAX 3000A Device Features Feature Usable gates Macrocells Logic array blocks Maximum user I/O pins tPD (ns) tSU (ns) tCO1 (ns) fCNT (MHz) EPM3032A 600 32 2 34 4.5 2.9 3.0 227.3 EPM3064A 1,250 64 ...