Mixed Signal ISP Flash MCU
C8051F300/1/2/3/4/5
Mixed Signal ISP Flash MCU Family
Analog Peripherals
- 8-Bit ADC ('F300/2 only)
• Up to 500 ksps • ...
Description
C8051F300/1/2/3/4/5
Mixed Signal ISP Flash MCU Family
Analog Peripherals
- 8-Bit ADC ('F300/2 only)
Up to 500 ksps Up to 8 external inputs Programmable amplifier gains of 4, 2, 1, & 0.5 VREF from external pin or VDD Built-in temperature sensor External conversion start input
- Comparator
Programmable hysteresis and response time Configurable as interrupt or reset source Low current (<0.5 µA)
On-chip Debug
- On-chip debug circuitry facilitates full speed, non-intrusive in-system debug (no emulator required)
- Provides breakpoints, single stepping, inspect/modify memory and registers
- Superior performance to emulation systems using ICE-chips, target pods, and sockets
- Complete development kit
Supply Voltage 2.7 to 3.6 V
- Typical operating current: 6.6 mA @ 25 MHz;
14 µA @ 32 kHz - Typical stop mode current: 0.1 µA
- Temperature range: –40 to +85 °C
High Speed 8051 µc Core - Pipelined instruction architecture; executes 70% of
instructions in 1 or 2 system clocks
- Up to 25 MIPS throughput with 25 MHz clock
- Expanded interrupt handler Memory - 256 bytes internal data RAM
- Up to 8 kB (‘F300/1/2/3), 4 kB (‘F304), or 2 kB (‘F305) Flash; 512 bytes are reserved in the 8 kB devices
Digital Peripherals - 8 Port I/O; All 5 V tolerant with high sink current
- Hardware enhanced UART and SMBus™ serial ports
- Three general-purpose 16-bit counter/timers
- 16-bit programmable counter array (PCA) with three capture/compare modules
- Real time clock mode using PCA or ti...
Similar Datasheet