C8051F304

C8051F300/1/2/3/4/5 Mixed Signal ISP Flash MCU Family Analog Peripherals - 8-Bit ADC ('F300/2 only) Up to 500 ksps Up to 8 external inputs Programmable amplifier gains of 4, 2, 1, & 0.5 VREF from external pin or VDD Built-in temperature sensor External conversion start input - Comparator Programmable hysteresis and response time Configurable as interrupt or reset source Low current (<0.5 µA) On-chip Debug - On-chip debug circuitry facilitates full speed, non-intrusive in-system debug (no emulator required) - Provides breakpoints, single stepping, inspect/modify memory and registers - Superior performance to emulation systems using ICE-chips, target pods, and sockets - Complete development kit Supply Voltage 2.7 to 3.6 V - Typical operating current: 6.6 mA @ 25 MHz; 14 µA @ 32 kHz - Typical stop mode current: 0.1 µA - Temperature range: –40 to +85 °C High Speed 8051 µc Core - Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks - Up to 25 MIPS throughput with 25 MHz clock - Expanded interrupt handler Memory - 256 bytes internal data RAM - Up to 8 kB (‘F300/1/2/3), 4 kB (‘F304), or 2 kB (‘F305) Flash; 512 bytes are reserved in the 8 kB devices Digital Peripherals - 8 Port I/O; All 5 V tolerant with high sink current - Hardware enhanced UART and SMBus™ serial ports - Three general-purpose 16-bit counter/timers - 16-bit programmable counter array (PCA) with three capture/compare modules - Real time clock mode using PCA or ti...