C8051F316

C8051F310/1/2/3/4/5/6/7 8/16 kB ISP Flash MCU Family Analog Peripherals - 10-Bit ADC (C8051F310/1/2/3/6 only) Up to 200 ksps Up to 21, 17, or 13 external single-ended or differen- tial inputs VREF from external pin or VDD Built-in temperature sensor External conversion start input - Comparators Programmable hysteresis and response time Configurable as interrupt or reset source (Compara- tor0) Low current ( 0.5 µA) On-Chip Debug - On-chip debug circuitry facilitates full speed, non-intrusive in-system debug  (no emulator required) - Provides breakpoints, single stepping,  inspect/modify memory and registers - Superior performance to emulation systems using ICE-Chips, target pods, and sockets - Complete development kit Supply Voltage 2.7 to 3.6 V - Typical operating current: 5 mA at 25 MHz; 11 µA at 32 kHz - Typical stop mode current: 0.1 µA - Temperature range: –40 to +85 °C High Speed 8051 µC Core - Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks - Up to 25 MIPS throughput with 25 MHz clock - Expanded interrupt handler Memory - 1280 bytes internal data RAM (1024 + 256) - 16 kB (C8051F310/1/6/7) or 8 kB (C8051F312/3/4/5) Flash; In-system programmable in 512-byte sectors Digital Peripherals - 29/25/21 Port I/O;  All 5 V tolerant with high sink current - Hardware enhanced UART, SMBus™, and SPI™ serial ports - Four general purpose 16-bit counter/timers - 16-bit programmable counter array (PCA) with fiv...