USB 2.0 High Speed Signal Conditioner
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
TUSB211, TUSB211I
SLLSEO0D – MAY ...
Description
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
TUSB211, TUSB211I
SLLSEO0D – MAY 2015 – REVISED OCTOBER 2017
TUSB211 USB 2.0 High Speed Signal Conditioner
1 Features
1 Compatible with USB 2.0, OTG 2.0 and BC 1.2 Support for LS, FS, HS signaling Active Power Consumption of 55 mW (Typical)
with 3.3-V Single Supply Selectable Signal Gain Via External Pulldown
Resistor Does Not Break DP, DM Trace Scalable Solution – Daisy Chain Device for High
Loss Applications Compact 1.6 mm x 1.6 mm QFN Package
2 Applications
Notebooks Desktops Docking Stations Cell Phones Active Cable, Cable Extenders Backplane Televisions Tablets
3 Description
The TUSB211 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel.
The device has a patent-pending design which is agnostic to USB Low Speed (LS) and Full Speed (FS) signals. LS and FS signal characteristics are unaffected by the TUSB211. HS signals are compensated.
Programmable signal gain permits fine tuning device performance to optimize High Speed signals at the connector. This helps to pass USB High Speed electrical compliance tests.
The footprint of TUSB211 does not break the continuity of the DP/DM signal path. This permits risk free system design of a complete USB channel.
In addition, TUSB211 is compatible with the USB OnThe-Go (OTG) and Battery Charging (BC) protocols
Device Information (1)
PART NUMBER
PACKAGE
B...
Similar Datasheet