TUSB212

Product Folder Order Now Technical Documents Tools & Software Support & Community TUSB212 SLLSEX5A – AUGUST 2017 – REVISED SEPTEMBER 2017 TUSB212 USB 2.0 High Speed Signal Conditioner 1 Features 1 Compatible with USB 2.0, OTG 2.0 and BC 1.2 Pin strap or I2C configurable Support for LS, FS, HS signaling Ultra-low USB Disconnect and Shutdown Power Consumption Selectable Signal Gain Via Daisy Chain Device for High Loss Applications D1P/M and D2P/M Interchangeable and Host/Device Agnostic Supports up to 5m pre-channel or 2m post- channel Cable Length – Four Selectable AC Boost Settings Via External Pulldown Resistor – DC Boost Along With AC Boost for Best Signal Integrity 2 Applications Notebooks Desktops Docking Stations Tablets Cell Phones Active Cable, Cable Extenders Backplane Televisions 3 Description The TUSB212 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel. TUSB212 has a patent-pending design which is agnostic to USB Low Speed (LS) and Full Speed (FS) signals. LS and FS signal characteristics are unaffected by the TUSB212 while HS signals are compensated. Programmable signal AC boost and DC boost permits fine tuning device performance to optimize High Speed signals at the connector. This helps to pass USB High Speed electrical compliance tests. In addition, TUSB212 is compatible with the USB OnThe-Go (OTG) and Battery Charging (BC) protocols. Device Information (1) PAR...